
Product parameters:
"Product introduction"
Ultrasonic distance measurement instrument in foreign countries are called the electronic tape measure ', suitable for construction, decoration, engineering and other places,
Can do beyond traditional tape measure. We sell ultrasonic distance measurement instrument based on data provided by the manufacturer
Display is more good products internationally, but also in the European and American market share is quite high, compared to
Rangefinder in the ultrasonic emission angle of other brands, anti-jamming, and so there is a clear difference.
"Product features"
CP-3010 new ultrasonic distance meter is fully applicable to home improvement, buy air conditioning area size, real estate agent or Builder
Must needed tool for quick measurement of room and room size, ultrasonic distance meter can measure the distance from 0.50M to 18M. Ultrasound
Wave distance measuring apparatus using ultrasonic wave to the measured object, then the ultrasonic measurement of round-trip time to determine distance. Plus the spirit level can also
Horizontal distance from the range and the school team.
【Product parameter 】
Measuring range: 50 cm ~18 m
Error: around 10 per thousand (for high precision, select GM60D)
Resolution: 0.01 m
Maximum measurement distance: 18 m
And maximum distances: 180.00 metres
The largest area: 18x18 square meters
Maximum volume: 1800.0 cubic meters
Battery: 23A 12V battery
Transmitting frequency: 40kHz
Operating temperature: 0 ° c ~ 50 ° c
【Measurement considerations 】
1, Ultrasonic Distance Tester is obstacle distance from the bottom of the machine, rather than the top distance ; If subject to the top, you will find displayed
And the actual distance will always have 10 cm of error;
2, in the Measuring body and the wall (barrier) perpendicular as possible, especially when measuring the distance, the more higher the vertical accuracy of measurement data ; Anti-
Angle, the greater, the greater error. When measuring Can play Open laser , Convenient and with the object to be measured Vertical;
3, when appears on the instrument 'ERROR ' , Indicating the measurement error. Error occurs because there are likely to be your instrument for measuring the distance not measurable fan
Wai (0.5-18 m ) ; Also you're measuring instruments may be more inclined, obstacle bounces the frequency is not accepted by the instrument;
4, when measuring something like some can absorb frequencies, such as curtains, carpets, and wallpaper category, will affect the accuracy of measurement; The same time
Measured between two points do not have any obstructions so as not to affect the accuracy of measurement;
5, the instrument uses a 9V alkaline battery not charging battery not to recharge the instrument;
6, the instrument cannot fall, touch, water, capital maintenance personnel do not propose open research.