Product parameters:
Changsheng CS2674AX ultra-high pressure tester AC-DC voltage tester Subway light rail test equipment
CS2674 series of ultra-high pressure tester is in the absorption, digestion of the international advanced insulation withstand voltage tester on the basis of many users with the actual use of China to improve and improve the development of ultra-high pressure tester for a variety of household Electrical and power supply, high-voltage cables, transformers, motors, high-voltage terminals, high and low voltage electrical appliances, switches, aerospace high-pressure materials analysis. And also scientific research laboratories, technical supervision Department of essential high pressure source test equipment.
100kV ultra-high pressure instrument has been used as China's CSR Group Qishuyan Locomotive and Rolling Stock Plant, China North Vehicle Group, the Ministry of Railways Product Quality Supervision and Inspection Center of Locomotive Vehicle Inspection Station inspection equipment, but also sold to Chengdu Locomotive and Rolling Stock Works, Hunan Electric Locomotive Works, Luoyang Locomotive Works, Zhuzhou Vehicle Plant, Nanjing Puzhen Vehicle Factory.
Features:
* Leakage current, test time continuously set arbitrarily, adaptability
* Simultaneous display of the measured actual value (time, voltage, current simultaneously display), failure sound and light alarm
· High voltage breakdown protection
· DC output can be measured capacitor voltage, leakage current, high voltage silicon reactor, reverse voltage reverse current transistor, a machine
model | CS2674AX | ||
A C W | Output voltage range | (0.00 to 20.00) kV | |
Maximum output power | 200VA | ||
Maximum rated current | 10mA | ||
Current range | 2mA, 10mA | ||
Output waveform | Sine wave | ||
Output waveform distortion | ≤5% | ||
testing time | 0.0s to 999s 0.0 = continuous testing | ||
D C W | Output voltage range | (0.00 to 20.00) kV | |
Maximum output power | 200VA | ||
Maximum rated current | 10mA | ||
Current range | 2mA, 10mA | ||
Ripple factor | ≤5% | ||
testing time | 0.0s to 999s 0 = continuous testing | ||
Electricity Pressure table | range | (0.00 to 20.00) kV | |
Precision | ± (5% + 3 words) | ||
Resolution | 10V | ||
Displays the value | Root mean square value | ||
Electricity flow table | measuring range | AC | 0.100 mA to 10.00 mA |
DC | 0.100 mA to 10.00 mA | ||
Resolution | 2mA: 1uA, 20mA Stall: 10uA, 200mA Stall: 0.1mA | ||
measurement accuracy | ± (5% + 3 words) | ||
meter Time Device | range | 0.0s to 999s | |
Minimum resolution | 0.1s | ||
Precision | ± (1% + 50ms) | ||
PLC interface | Have | ||
Remote control interface | Have | ||
