Nanjing Changsheng CS9920B | program-controlled ultra-high pressure tester | 10kV output current | Genuine Warranty

45000 CNY (6552.13USD)

Product parameters:

Processing customization: No
Type: program-controlled ultra-high pressure tester
Brand: Changsheng
Model: CS9920B
Measuring range: 1.00kV ~ 20.00kV
Input voltage: 220
Output voltage: 1.00kV ~ 20.00kV
Ambient temperature: See data
Weight: See details
Dimensions: See details
Voltage measurement error: ± (2% of reading +5 V)

Nanjing Changsheng new CS9920B program-controlled ultra-high pressure tester

CS9920A / 9920B series is designed for high-voltage devices, ultra-high voltage tester, is the first domestic output voltage up to 10kV program-controlled safety tester.

◆ AC withstand voltage test current minimum resolution of 0.1uA, DC voltage test current minimum resolution of 0.001uA; is the only industry with low current resolution of the tester

◆ Output voltage has normal mode and gradient mode

Key Features:

◆ Security anti-power wall and safety protection system, to protect the safety of the operator to ensure that the test pieces are not damaged.

◆ Generated by the DDS standard sine wave, linear power amplifier driver output, the output voltage waveform is pure, distortion is small, better than 2%.

◆ fast voltage build-up time:

(1) AC output voltage of the establishment of the time for the 126ms (2) between steps and the minimum time of 450ms.

◆ With 0.4ms fast cut off function.

◆ AC withstand voltage test current minimum resolution of 0.1uA, DC voltage test current minimum resolution of 0.001uA; is the only industry with low current resolution of the tester.

◆ Output voltage has normal mode and gradient mode; normal mode is to set the multi-step output voltage test, the previous test time after the end of the output voltage from the set value is reduced to 0 in the next output of the output voltage gradient mode is Refers to the set of non-output voltage test, the previous step after the end of the test time, the output voltage does not drop to 0, but according to the next set of voltage directly to the set voltage output is the only industry with two Output voltage mode of the tester.

◆ Current measurement terminal can choose to ground mode or floating mode.Grounding mode refers to the current measurement terminal and chassis connected together, this model is mainly used in the test system.Floating mode refers to the current measurement terminal suspension, not with the machine Shell connected together, this model is applied to high precision measurement occasions.

◆ can automatically save the test results in the tester, easy to check the test results; also can be connected with the RS232 interface to test the test results into the EXCEL table for data statistics, analysis.

◆ Set the voltage rise time, test time, voltage drop time and interval time.

◆ PLC interface test signal can output 24V level, can also output contacts.

◆ With the list display function, when the test step is greater than 2, after the test is over, the tester can automatically display the results of each step of the test.

◆ Arc detection with current mode and level mode two.