Orchid Thai SRT 6200 surface roughness measuring instrument/smoothness/roughness Tester

1+	4600 CNY (669.78USD)
3+	4400 CNY (640.66USD)

add to cart

Product parameters:

Customized processing: no
Type: surface roughness Tester
Brand: LANDTEK/Orchid Thai
Model: SRT 6200

1. characteristics

The instrument uses computer technology, in line with the national standard GB/t 6062 and ISO, DIN, ANSI, and JIS four criteria, can be widely applied

Within the production site, can measure a variety of surface roughness of machined parts and calculates the corresponding parameters according to the selected measuring conditions,

Liquid crystal display clearly shows all measurement parameters. Measurement of workpiece surface roughness, place the sensor in the workpiece edge

, Owned by instruments within the driver drives the sensors along the surface, such as speed skating, sensors with built-in sharp stylus

Measuring surface roughness, workpiece measuring surface roughness stylus displacement caused by, the displacement of the sensor inductor coil

Sense of change, thus in phase rectifier output terminal and the surface roughness than analog signals, the signal

Amplifiers and level conversion and enters the data acquisition system, DSP digital filter chips will collect data and calculation, measurement

Volume results in the LCD display, and can communicate with the PC, data analysis, and print.

* Multi-parameter measurement: Ra.Rz;

* High-precision inductance sensor

* RC. PC-RC. GAUSS. D-P four filter modes;

* Built-in lithium-ion rechargeable battery and charging circuit of high capacity;

* Mechatronics design, small size, light weight, easy to use, built-in standard RS232 interface Allows you to communicate with the PC machine;

* Has an automatic power off function.

This table there are two shutdown modes: one is manually shut down, another 5 minutes for the keyboard operation shut down.

* Metric conversion function.

2 parameters

Display: blue backlight, 4-digit, 10MM LCD

Measured parameters: Ra, Rz

Measuring range:

Ra: 0.05-10.00um/1.000-400.0uinch

Rz: 0.020-100.0um/0.780-4000uinch

Accuracy: less than ± 10%

Value change: less than 6%

Sensors:

Measuring principle: inductive

RADIUS: 10 μ m

Material: diamond

Force: 16mN (1.6gf)

Angle: 90 °

Vertical RADIUS: 48mm

Maximum drive trip: 17.5mm/0.7inch

Sampling length l (optional): 0.25mm, 0.8mm,

2.5mm

Drive speed:

When measuring

When the sampling =0.25mm a long time, Vt=0.135mm/s

When the sampling length = 0.8mm, Vt=0.5mm/s

When the sampling length = 2.5mm, Vt=1mm/s

Return Vt=1mm/

Resolution:

Value of 0.001 μ m as measured < 10μm时

0.01 μ m as 10 μ m ≤ measurement value< 100μm时

0.1 μ m when measurement value ≥ 100 μ m

Evaluation length: 1-5L optional

Power supply: built-in lithium-ion rechargeable battery 1.

Work environment:

Temperature: 0-50 c

Humidity: ﹤ 85% RH

Overall dimensions: 140x52x48mm

Net weight: about 420g