WATSCN switch for 50/60Hz, rated voltage up to 1000V, rated current 63A dual power switches, to achieve the common power supply (n) and standby power supply (r) switch between automatic or manual. (Primary and backup power supply can power, starter generators, batteries, and primary and backup power is defined by the user.) Dual power supplies electricity customers unattended. This switch applies to state-mandated premium or a load of users, such as high-rise buildings, posts and telecommunications, coal shipping and industrial lines, health, military installations, airports, fire protection, metallurgy, chemical industry, textile, oil, does not allow an important place for power outages.

Control device: built-in controller
Product structure: small size, high current, simple structure, ATS integration
Features: fast switching speed, low failure rate, easy maintenance and reliable performance
Connection mode: front terminals
Conversion mode: power grids, power generators, automatic switch resettable
Shell: 63, 125
Current: 10, 16, 20, 25, 32, 40, 50, 63, 80, 100, 125A
Product category: DZ47, C65, isolated
Number of poles: 2, 3, 4
Product standard: GB/T14048.11
ATSE:CB level, with overload and short circuit protection
PC-level, not with overload and short circuit protection

Normal operating conditions
Ambient temperature of-5 c ~+40 c, 24-hour average values do not exceed + 35 c;
Maximum temperature + 40 ° c relative humidity does not exceed 50%, allows a high relative humidity at low temperatures, for example, 90% + 20 ℃,
But should take into account the possible condensation due to temperature variation.
Installation site altitude does not exceed 2000m, class IV class. Tilt is not more than ± 23 degrees centigrade. Pollution rating of 3.
If the above conditions cannot be met, the consultation order should be the manufacturer, the switch for the offshore, oil and nuclear power plants should be checked
Order technical agreement.