JK2817B LCR Meter 100KHz digital electric bridge Jinke

Product parameters:

Performance characteristics:
192x64 dot matrix graphic LCD display

Humanized operation interface, easy operation
50 Hz-200 kHz, a total of 21 typical test frequency (JK2816C)

50 Hz-100 kHz, a total of 20 typical test frequency (JK2817B)

Measure the level of stability and accuracy

Resolution 5 reading speed can be up to 12 times per second

Accurate load calibration
30 ω/100 ω optional signal source output impedance

Built-in comparator 4 sorting and counting

Handler interface (optional)
RS-232C (optional)

Technical parameters:

Test parameters	\| Z\|, C, L, R, , D, Q,
Monitor	192x64 dot-matrix LCD display, 6-bit reading resolution
Testing frequency	JK2816A	50 Hz-200 kHz, more than 12,000 points
	JK2816C	50 Hz, 60 Hz, 100 Hz, 120 Hz, 200 Hz, 400 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 5 kHz, 10 kHz, 20 kHz, 40 kHz, 50 kHz and 100 kHz,200kHz a total of 21 typical frequency
	JK2817B	50/60/80//100/120/200/400/500/800/1k/2k/4k/5k/80k/ 10K/20K/25k/40k/50k/100k total of 20 typical frequency
Test level	0.1V 0.3V 1V
Basic accuracy	0.1%
Display range	\| Z\|, R, X: 0.0001 Ω — 99.999MΩ C: 0.001 pF — 99999 μ F L: 0.001 μH — 99.999 kH Q: 0.0001-9.9999 D: 0.0001-9.9999 Δ% : 99.999%-99.999%
Measuring speed	Slow speed: 1.5 times/second, speed: 5 times per second, fast: 12 times/sec
Equivalent circuit	Series, parallel,
Range	Automatically keep
Trigger mode	Inside the manual, external bus
The average number of
Correction function	Open circuit, short circuit, load correction
Measuring junction	5-port
Display mode	Direct-reading, δ ABS, δ%, file, and file count
Table scan	4 frequency, level,
Comparator function
		Four (three files a document does not), another subsidiary
Memory
Interface	RS-232C, HANDLER, GPIB (option)

General technical specifications: