First, use:

The apparatus is in accordance with the national standard GB/T261 methods for determination of the flash point of petroleum products (closed cup method) method and under the national petrochemical industry standard SH0315

Closed cup flash point tester for the requirements of the technical condition of design and manufacturing, petroleum products after sample heated in a closed cup, oil vapor and air

Formation of mixture of gases, in contact with the flame when the flash fires, the minimum temperature of the test (which is the flash point of petroleum product sample).

Second, the technical parameters:

1, power supply: AC220V ±, 50Hz.

2, heating devices: ⑴ furnace for silicon carbide materials, power 600W electric wire.
B from 0~ heating power 600W adjustable.
3, sample rate: 1~ 12 ° c/min.

4, electric mixing device: ⑴ agitator motor: 45TYZ constant speed motor.
B transmission mode: soft shaft couplings.
C mixing blade specification: 8x40 (mm).
5, standard oil Cup: ⑴ inner diameter: 50.8 mm.
⑵ depth: 56 mm.
C oil capacity groove depth: 34.2 mm.
D oil capacity: approximately 70 ml.
6, lighter: ⑴ ignition sources: gas (or other civilian gas, the same below).
⑵ lighter hole diameter: 0.8 mm.
7, thermometers: mercury thermometers, in line with the regulation of GB514.
-30~ ⑴ scale 170 ¡æ,-1 c.
⑵ scale 100~ 300 ℃,-1 c.
8, environment temperature: ≤ 35.

9, relative humidity: ≤ 85%.

10, power consumption: less than 650W.