MN60-C Type surface gloss meter Is in accordance with international standards ISO 2813, Foreign standards ASTM D523, DIN67530And national standards GB9754, GB9966, GB / T13891Design and production, the technology can be achieved, and higher than JJG696-2002"Mirror gloss meter and gloss board" identification procedures in a working machine requirements.

Mainly used:

Painting: household products, toys and so on.

Wood: logs, glazed, sheet and so on.

Automotive parts: wheels, dashboard, trim fittings.

Plastic: modular products, frames, plastic cans, mobile phone shell and so on.

Commodity: wood, plastic or metal products.

Ceramics: ceramic cups, bathroom supplies, tiles and so on.

Tubes and cylinders: tubes, bottles, soft drinks cans and so on.

Electroplating: door handles, jewelry, all kinds of electroplating and so on.

Military ownership: ultra-low gloss Army Yong Products and so on.

Matte glass bottles: perfume, bottles and so on.

Features:

1.Small size, light weight, the real portable machine.

2.Power, peace of mind, high efficiency, a battery can be used continuously 60Hour measurement of nearly ten thousand

data.

3.High stability, which means that the test.

4. LED Long life light source.

5.Quartz Crystal Standard Edition, the annual rate of change is very low.

6.Automatic shutdown, saving power, to avoid battery flow leading to failure.

Technical Parameters:

1.Gloss parameters (Glossy unit GS)

2.Projection angle: 60 °

3.Operating voltage: section 5number (AA)Dry batteries can be. (1.5v)

4.Measuring area: 2 × 2mm

5.Window size: Ф4mm

6.Host size: 114 x 32 x 64 mm (Length × width × height)

7.Instrument weight: 285g

Factory list:

1, a plastic outer box

2, a host

3, the standard box (including a black quartz crystal standard board, a piece of white ceramic work board)

4, a manual instruction book

5, a certificate

6, wipe a mirror cloth