75-I-o table is used to measure the length of the loggers and various machines Rotary, generally applied to mine drilling depth, volume by cable length, wound coils number of measurements to be recorded.
This table is a five-digit number, and shaft rotation direction, and reverse rotation, Shun became inducted GM, reversed to decrease maximum number of records for 99999.
First turning a digital shaft 1/10, shaft rotation can automatically carry a week later.
This table with zero body, such as to promote press handles all zero after a certain number, then a second-stage record.
Table installation should pay attention to balance, contact should be concentric with the host, otherwise it will turn crooked or twisted, resulting in count or failure is not allowed.
Maximum speed: 350 beats/min in this table, too quickly can cause damage to parts.
Double zero, head position number must be transferred within the window cover, not in turning complex zero.
This round a table, gears are made of special plastics, should not be in contact with high temperature flammable gas, bearing must be lubricated frequently.

Sweep the shop

Sweep this product