Specifications for the 20 * 40MM

1.Imports of domestic materials .PET material ,Without leaving residue, for the use of mobile phones and R & D characteristics.

2.The surface of the protective film is abrasion-resistant and scratch-resistant ,Absolutely super wear-resistant.

3.The protective film is treated with UV protection ,Put an end to UV damage to the LCD screen.

4.Can be reduced reflective 90%.Light transmission rate of 99%,Clear and realistic picture ,Film is not easy to produce bubbles ,Can be used repeatedly.

5.Fully electrostatic adsorption principle ,So paste more simple ,Not easy to produce bubbles ,Easy to expose ,Can be repeatedly pasted

Instructions for use:

1First compare the film and the screen size ,Then install .The edges of the screen need to retain a certain gap;

2Wipe the screen clean with the included cleaning cloth ,Put the dust //fingerprint //Oil removed;

3use 1Label to tear off the base film about 1/3,Paste side down ,Avoid touching the adhesive surface with your fingers;

4Align the edges of the screen ,From top to bottom gently paste ,Slowly tear off 1The subject of film and homeopathic from left to right fit on the screen .Please paste as slowly as possible and confirm the attachment is good ,Avoid air bubbles .If bubbles ,Credit cards can be used to push the bubbles away ,You can also use a cleaning cloth to squeeze to the edge of the screen ,Such as more bubbles can be peeled off re-posted ,Nail can be gently opened the tip of the film ,Tear off the re-posted;

5Finally use 2Label paper will be off the surface type film can be torn off ,Boot view ,carry out.

common problem:

1There is dust :Place the film on a transparent tape ,Can remove dust and wool fibers on the membrane;

2Have bubbles :Tear the film to the bubble position ,And then put down the re-adsorption can be;

3Posted crooked :Tear the film ,Re-align the adsorption