Taber Wear testing machine

Type Type: GYX-5135

This machine is suitable for leather, fabric, paint, paper, tile, plywood, glass, natural rubber and other wear-test methods for the standard cut

Knife cut to take samples, using prescribed types of grinding wheels, provides weight and speed to wear of the specimens, after the test is completed remove specimen

Regulation Grid:

1.Abrasion wheel diameter 2Inch, thickness 1/2Inches

2.Wear around Center spacing: 63.5mm

3.Abrasion wheel and the specimen plate Center spacing: 37~38mm

4.Test speed: 60rpm (Or specify)

5.Load Heavy: 250g, 500g, 1000gWeight adjustment

6.Counter: electronic LCD display 4Digit, auto stop

7.Test piece dimensions: l180, Center hole l8mm Thickness 1~5mm Soft and hard materials can be tested

8.Distribution : Vacuum cleaner Taiwan, film cutter, wrench, wheel set, sandpaper Pack

9.Machine size: 33 x 43 x 30cm

10.Machine weight: 25kg

11.Electricity Source: single phase 110V/60Hz Or 220V/50Hz