Knitted fabrics: specifications 50 * 70MM

1.Imports of domestic materials .PET material ,Without leaving residue, for the use of mobile phones and R & D characteristics.

2.The surface of the protective film is abrasion-resistant and scratch-resistant ,Absolutely super wear-resistant.

3.The protective film is treated with UV protection ,Put an end to UV damage to the LCD screen.

4.Can be reduced reflective 90%.Light transmission rate of 99%,Clear and realistic picture ,Film is not easy to produce bubbles ,Can be used repeatedly.

5.Fully electrostatic adsorption principle ,So paste more simple ,Not easy to produce bubbles ,Easy to expose ,Can be repeatedly pasted

Instructions for use:

1First compare the film and the screen size ,And then install .The edge of the screen to retain a certain gap;

2Wipe the screen with the included cleaning cloth ,Put the dust //fingerprint //Oil removal;

3use 1Label the peeled off the bottom film about 1/3,Paste face down ,Please avoid touching your fingers;

4Align the edge of the screen ,From top to bottom gently paste ,Slowly tear off 1The label of the film and homeopathy from left to right fit on the screen .Please try to be as slow as possible and confirm that it is good ,Avoid bubbles .If there is bubbles ,Credit cards can be used to push the bubbles ,You can also use the cleaning cloth to squeeze to the edge of the screen ,Such as bubbles can be peeled off more posted ,Can be gently opened the corner of the film with nails ,Tear off the re-paste;

5Finally use 2Label paper will be off the surface of the film can be off ,Boot view ,carry out.

common problem:

1There is dust :Place the film on a clear tape ,Removes dust and hair fibers from the membrane;

2There are bubbles :The film was torn to the bubble position ,And then re-adsorption can be put down;

3Posted a crooked :Tear the film ,Re-align and lower the adsorption