QT-I determination apparatus for drying time of paint film is based on the principle of similar foreign products, and developed into

. Selection of high-precision stepping motor controlled by single-chip microcomputer, driven spherical contact rod, 12g load-pass

Six-speed (0.5h/r,1h/r, 2H/r, 6h/r, 12h/r, 24h/r), draw a diameter of 80mm

Circular trajectory, depending on where track disappears, covered with drying time chart is just paint drying time.

Main technical parameter:

1. driving motor: stepper motor 36BF02B

2. sphere: 8mm

3. the revolution speed: 0.5h/r, 1h/r, 2H/r, 6h/r, 12h/r, 24h/r

4. Rod the load mass: 12g g

5. power voltage: AC 220V50Hz

6. overall dimension: 140X140X156mm (l x w x h)

Scope of application:

Tester is applied to measuring the drying time of paint film paints, surface coatings such as paint drying time to ensure the paint,

Quality of the paint and coating surface quality.

Use and maintenance:

1. flat plate requirements, size not smaller than 140X140mm

2 remove the 12g weight, adjust the bolts after Rails, with spherical contact rod and adjusting bolt, balance

12g weight.

3. test panels preparation according to the specified film thickness or with a preparation made from other test-preparation tool in Central

100X100mm square after the film placed on the Analyzer, Tester Rod rotation position placed in the film

Heart.

4. switch on: (1) press the tester power switch on the back. (2) the pre-selected drying time button and then press the OK button.

(3) press the run key, instrument started running. (4) If you need to modify the set time or in the process of running

Need to stop, press the clear key. Show time as '0' at this time, the instrument stops running. After the pre-selection time again

Press the confirmation key, and then press the run key, the instrument continues to run. (5) the instrument after use turn off the power, cleaned

The bottom of the sphere. Pay attention to moisture-proof, shockproof, for safekeeping. (6) instruments service (in addition to man-made factors) warranty

A year.