Factory direct supply solenoid Coil copper MZD1-100A 380V

Factory direct supply solenoid Coil copper MZD1-100A 380V

4+
35 CNY (5.1USD)
10+
33 CNY (4.81USD)
20+
31 CNY (4.52USD)

add to cart

Product parameters:

  • Customized processing: Yes
  • Category: hard magnetic materials
  • Current: AC
  • Brand: Shanghai huatai
  • Model: MZD1-100A
  • Application: brake
  • Size: 100


1: scope
MZD1 series AC single-phase brake electro-magnet (hereinafter referred to as electro-magnets) apply to the Exchange rated voltage up to 380V 50Hz circuit, the main
As matching TJ2 or JWZ series brake shoes brake operating device.


2: ordering code


3: normal working conditions and installation conditions
3.1 electromagnet work intermittent long-term working system and two types of repeated short-time work, rated working voltage of AC 50Hz, 220V and
Both 380V.
3.2 long work that TD=100%, not more than 20 times every hour, repeated short-time work that TD=40%, each hour of operation is not more than
300 times.
3.3 under normal working conditions for the electromagnet of repeated short-time working life to 600,000 times.
3.4 electromagnets when the voltage is less than 85% rated voltage, the technical data as shown in the table.


Note: electromagnet armature torque does not include the weight of the torque.

4: Other
4.1 structural characteristics
4.1.1 electromagnet made of open type, degree of protection IP00.
4.1.2 electromagnet consists mainly of iron core, coil and armature consists of three major parts of Rotary type structure.
4.1.3 when when the coil is energized, armature snap-on the iron core, armature through the stop pressure forces the brake lever at the brake lever movement
Brakes brake Oison opened. When the power is switched off, the brake in the presence of springs, armature out of the iron core, the brakes will lock
W hold and reach the braking effect.
4.2 tips
4.2.1 size L3 is when the magnet is released, the maximum position of the edge.
4.2.2 s refers to brake the brake lever after the introduction of the solenoid armature, the moving iron core side the edge along the straight line distance between the polar and static iron core.

5: overall and installing dimensions


Ordering instructions
When placing an order, indicate:
Rated voltage + power + volume model +,
For example: MZD1-100 10,
Voltage of 380V and frequency of 50Hz, power is 40% brake electromagnet of AC single phase 10.
Power is 100% please indicate when ordering.


Sweep the shop

Sweep this product