Product parameters:
Why buy VGA to AV it, we know that the largest computer monitors, but also more than 20 inches, and in the computer point of view PPS online movies or download large certainly not fun.If you want to see the film on the big screen TV definitely more cool, Congratulations now VGA to TV upgraded version of the video produced.
note: As the AV input is not high-definition output, the resolution of the monitor is also higher than the average TV, so go to the TV text effect to be almost like to see the text on television and display the same effect as detour, the market VGA turn TV Converters are not up to, because the projector itself is not high-definition please Used with caution
All upgrades are supported by this upgrade Integrated and non-integrated graphics , Also supports all new and old TV sets.
TV-VIEW Instructions
TV-VIEW Is a portable TV standard for all countries in the world of computer to TV converter, which can convert the computer's output signal into a TV signal can be accepted, and can use the video recorder to record images. Resolution up to 1280x1024, USB2.0Interface power supply, very suitable for travel countries to do briefing, education and training, product display and play computer games.
Pure hardware conversion, compatible with all operating systems.
Resolution support 640x480, 800x600, 1024x768.1280x1024.
Refresh rate up to 85Hz.
Optional NTSC , PAL-B , PAL-D , PAL-G , PAL-H and PAL-I Output.
Support up, down, left and right position adjustment, on-screen display menu to adjust the output effect.
The display and the TV are displayed at the same time.
size: 95mm (long ) X55mm (width ) X 30 mm (high)
power supply (DC IN ): Then USB power cable.
Video outputVIDEO OUT ): Connection VT Video input to TV, VCR and projector.
STerminal Wire OutputS-VIDEO OUT ): Connection VT To television sets, video recorders and projectors STerminal input
VGA OutputVGA OUT ): Connection VT To the display.
VGA InputVGA IN ): Connect from the computer display card VGA Line to VT.
Left, Right, Down, Up buttons (): Press the Left, Right, Down, and Up buttons to adjust the position of the overall picture on the TV.
MenuMENU ): Press this button to cycle through the following functions, which are vertical widths (H), Horizontal width (V), Brightness, Contrast, Grayscale, Color Saturation, Anti-flicker, Sharpness, On-Screen Display Background Color.
Size (SIZE ): Adjust the overall picture frame outside the box or box full screen display.
teaching - Easily record computer software teaching, training video
briefing - Classrooms and meeting rooms ideal for presentation supplies
recording - Transcribes the edited computer image to the recorder
entertainment - Will the computer play VCD , DVD And the game is switched to the TV
debugging:
Because the desktop VGA port is usually turned off, the installation of the converter needs to be in the notebook display properties to open the VGA port will enable the converter (see Figure 1), the notebook computer's VGA port is not enough, normal work,
WIN 7 operating system debugging, connect all the connections, enter the control panel display resolution alignment (see below), click Detection key , It will make the notebook's VGA interface to open, there will be a signal output to the TV
XP operating system debugging, connect all the connections, enter the control panel display property settings (see below), click on the drop-down menu, select the 2 graphics card, and then tick the wide screen, click the OK button, So that the notebook's VGA interface to open, there will be a signal output on the TV, which is to look at about 2 of the display (TV), is set to the left or right side of the graphics card 1 and press the left mouse button to see On the window along, hold down the mouse to the left (or right) to move the desired image to the TV, then the TV will have to want to see the image
In the conversion, such as the scrolling TV, etc., then there may be interference, as long as the USB power cord out and then re-plug it, or for a USB port can be.
Common problems and their solutions:
1: No display
Check whether the cable is connected correctly, whether the output and input are reversed, the power is connected properly. The first test computer resolution can be set to 800 * 600, refresh rate 60HZ, with particular attention to the general resolution of desktop computers are too high and cause the TV does not Support for display.
2: there Huaping
Usually the current interference, the solution can be re-plug the USB power supply line. Or unplug all the lines, the first USB-powered, then AV and vga cable
3: TV has a static image, do not display the dynamic image: video card driver is not correct, re-download the official graphics driver.
4: Notebook connection can not be displayed:
Mainly notebook video release does not open, different notebooks have different shortcuts, are generally Fn + Fx release,
(Fx is F1 to F12 in the middle of a key, on which there are two small box keys, the common is the F5 and F8, you can switch the video output mode) followed by the copy mode Extended mode Single TV mode Single monitor mode, Can be switched several times.
Tips: set the expansion mode, you can achieve different content notebook and television play, for example, laptop Internet access, TV to see large, most of the notebook can be set.