1. product overview

Surface roughness Tester TR100 is designed for measurement of workpiece surface roughness of intelligent equipment. The instrument set today's microprocessor technology and sensor technology in

Integrated optimization of advanced microprocessors and integrated circuits, which adapt to the development trend of today's instruments ultra-small architecture, you can complete the rough

Parameters collection, processing and display work.

TR100 is applicable to industry, manufacturing, inspection, commodity inspection departments, especially for large workpieces and field inspection of the production lines, as well as the detection, measurement, and inspection

Sector out of calibration.

2. functional characteristics

Optimized structure design of circuits and sensors, electric box, drives and display parts into one, to reach the highly integrated; Any Ra, Rz measurement

Parameters; Not only for measuring cylindrical, planar, cone, also, length and width is greater than the 80x30mm trench.

3. technical parameters

Measured parameters: Ra, Rz

Measuring range: Ra:0.05-10 μ m Rz:0.1-50 μ m

Sample length: 0.25mm, 0.8mm, 2.5mm

Evaluation length: 1.25mm, 4mm, 5mm

Scanning length: 6mm

Indication error: ≤ ± 15%

Shows changes in the value of: < 12%

Sensors: piezoelectric crystals

Power supply: 3.6Vx2 NI-CD battery

Operating temperature: 0oC-40oC

Weight: 200g

Overall dimensions: 125x73x26mm

4. basic configuration

Host, power adapter, multi-reticle pattern

5. optional accessories

No