- Marketplace
- Merchants
- Restaurants
- UAE house
- Cloud accounting (GCC VAT)
- Me
- Cart
- My order
- Address book
- Favorite
- Link
- About us
- Download App
- 中文
- Merchant panel
Sheen fineness dispersion meter | Fineness
Product parameters:
- Customized processing: no
- Brand: meet macros
- Model: Sheen
One Introduction
Thin plate applied to the distributed products in the production, storage and application of light detection, such as should be used: paints, plastics, paints, printing oil
Ink, paper, ceramics, pharmaceuticals, food and so on.
Why use fineness:
1)---use the fineness of grinding costs Board can determine the minimum ground time, to save costs.
2)Abrasive material will produce irregular enough film, which does not meet the standard gloss values.
3)In equal time in the grinding of pigments from different sources.
4)Device optimization.
Two Description
Two Description
Sometimes we will use ' Hagemann ' as these scales are usually described, although domestic and international norm suggested by UM, but sometimes
Like ' Hagemann ' ' rose ' by any scale of scale is needed.
Fineness of each plate consists of a block of hardened stainless steel, dimensions 175x63x13mm, equipped with a single or double 12.5mm wide slots, the blade.
Size range: 0-25 fineness µ m,0-50 µ m,0-100 µ m/special order.
Index value: 0-25 to 2.5 μg m;0-50 to 5 μ m;0-100 to 10 μ m
Third, use
Test detail reference to United Kingdom standards BS3900C6, ISO1524,ASTM-D 1210 standards to international standards and other standards of the current version. ' Grinding fineness ' definition for the term under specific test conditions
Readings of the fineness on the Board, this reading indicates that the dispersion of solid particles in the abrasive particle depth to identify cases.
Selected grinding particles must be dry and clean, and placed on a flat surface. as a test pilot supplies of raw material is poured into the bottom of the Groove, his hands holding knife blade with the right angle, and smooth speed longitudinal
Press to fineness, need to exert sufficient downward pressure on the blade to clean abrasive particles at the same time, and filled with particles in the Groove. By observing the fineness, scratch at the right angle and angle, immediately write down the measurement
Degree of fineness of grind.
Along the Groove note when the raw material is first displayed the mottled surface of the significant moment, down in 3mm wide grooves in the number 5 to 10 the number of ticks between. the high number of ticks as the grinding fineness, not
When spots begin to appear on the surface, appear on any of the scattered spots. fineness of finished boards immediately after cleaning.
Four wide Groove size panel
This tool and the fineness of plate are in accord, just Groove wide a lot (37mm) so that the wide Groove makes some
Mass of particles such as coating polymer, fibres and other discrete items easier to show, while grinding fineness for
Common way to read out. Size range with fineness above, such as: 0-25 µ m,0-50 µ m,0-100 µ m.
Five, ordering information:
Order number | Size range (µ m) | Number of thin plate |
Ref.501/25 | 0~ 25 | Double Groove |
Ref.501/50 | 0~ 50 | Double Groove |
Ref.501/100 | 0~ 100 | Double Groove |
Ref.502/25 | 0~ 25 | Single slot |
Ref.502/50 | 0~ 50 | Single slot |
Ref.502/100 | 0~ 100 | Single slot |
Ref.504/25 | 0~ 25 | Wide Groove |
Ref.504/50 | 0~ 50 | Wide Groove |
Ref.504/100 | 0~ 100 | Wide Groove |
