- Marketplace
- Merchants
- Restaurants
- UAE house
- Cloud accounting (GCC VAT)
- Me
- Cart
- My order
- Address book
- Favorite
- Link
- About us
- Download App
- 中文
- Merchant panel
Supply AT5011A digital spectrum analyzer/1GHz Analyzer
Product parameters:
- Customized processing: no
- Type: digital spectrum analyzer
- Brand: meet macros
- Model: AT5011A
Description:
Spectrum Analyzer can measure the frequency range 0.15 MHz ~1050MHz AT5011A; Center frequency setting has a rough reconcile the fine tuning, plus 100kHz/~100MHz/sweep width selection of frequency measuring instruments which are formed. Center frequency display window is a 4-digit LED display, readings or optional center frequency marker frequency readout. This instrument applies Yu products development Shi of early test, in make third party official test zhiqian for pre certification assessment, tie high frequency probe AZ530 series (high impedance anti-probe AZ530-H; farm single very probe AZ530-E; magnetic field near field probe AZ530-M) applies Yu early prototype circuit board and as machine stage, on cable and printed board, at of launches ' hot ' test and electromagnetic compatible sex level assessment.
Features:
• Frequency range: 0.15~1050MHz
• 4-digit digital display (center frequency, 0.1MHz resolution)
• -100~+13dBm range, 20KHz, 400KHz If bandwidth and 4KHz video filters
• Tracking generator
• Output amplitude: +0~-50dBm (50 ω)
Uses:
An Taixin Spectrum Analyzer information that normally appears not the processed signal, voltage, power, cycle, waveforms, sideband and frequency of wave distortion, dual-tone intermodulation distortion detection and clutter. Good remote control, intercom, measuring transmitter receiver, cordless phone survey for analysis. Also can be widely used in teaching and research. Spectrum Analyzer can really see An Taixin signals (such as RF pulses) images using Fourier series expansion, more easy to understand teaching, scientific research better.
Cable TV CATV and telecommunications testing:
An Taixin spectrum analyzers meet the impedance converters (50 ω conversion 75 ω), cable television (CATV) and communications, cable, wireless systems for inspection and analysis of signal frequency.
GSM, CDMA mobile phone repair:
An Taixin Spectrum Analyzer can detect mobile phone RF local oscillator signal if signal transmitter signal. AT5011A series Spectrum Analyzer maintenance phone no network failure point, fast and accurate fault location repairs.
Frequency extension:
• Instrument combined with frequency Extender (AT5000-F1) can measure the frequency extension to 2000MHz (qualitative measure), only to enter a channel extension, cannot be used to expand the trace source, 1050 measurement range MHz~2050 MHz.
• Instrument combined with frequency Extender (AT5000-F2) can measure the frequency extension to 3000MHz (qualitative measure), only to enter a channel extension, cannot be used to expand the trace source, 2050 measurement range MHz~3050 MHz.
Electromagnetic compatibility testing (EMC):
• Measuring all kinds of electronic devices with the launch of the features of harmful electromagnetic waves;
• Cooperate with EMI interface AT-166 is testing conducted interference testing;
• Combined with electric field Monopole probe AZ-530-E for testing radiated emissions testing;
• Combined with magnetic field probe AZ-530-M on the inner circuit of the product being tested tested sources of interference;
• High-impedance probe AZ-530-H on the inner circuit of the product being tested for maintenance testing.
Listen signal function:
FM demodulation signal Spectrum Analyzer output, and analyse the content of unencrypted radio and broadcast signals to influence can be used to identify noise, timely analysis from the air station, were testing in order to determine the normal running and measuring some unknown third party radio activity.
Frequency sweep function:
Frequency: sets the Center frequencies of the Spectrum Analyzer, and then when the sweep width to '0' Hz, signal output frequency signal.
Sweep: instrument combined with tracking function signal source products to be measured pass band frequency sweep product series will be measured in the signal trace source (output) and instrument detection channel (input), and then set the desired frequency can be detected.
For example: 750MHz ± 10 MHz the process needs to be tested by frequency sweep testing. Center frequency is set to 750MHz, the sweep width set at 2MHz/you can test (CRT screen when 2MHz/is 20MHz). CRT display scan out of curves.
Technical specifications:
Frequency
Range: 0.15~1050MHz
Center frequency display accuracy: ± 2%x spectral width +5x10-3x frequency +100KHz
Marking accuracy: ± 0.1% band +100HKz
Frequency display resolution: 100KHz (4-digit LED)
Sweep width: 100KHz/case ~100MHz/case 125 gears and 0Hz/(0 scan), accuracy: ± 10%
Frequency stability: better than 150KHz/hours
Wide frequency band ( -3dB): 20KHz (± 50%); 400KHz+ (0, 40%); video filter (pass); 4KHz
Scan rate: 43Hz
Range
Range: -100~+13dBm
Display range: 80dB (10dB/)
Reference level: -27dB at 500MHz
Average noise level: -90dBm (20KHz, dBm typical)
Distortion: 2 3 ﹤ -55dBc, 3-order intermodulation: -70dBc
Sensitivity: better than -90dBm
A logarithmic scale: ± 2dB (without the attenuator), 500MHz
Enter
Impedance: 50 ω
Connectors: n (f) connector
Attenuator: 0~40dB (step 4x10dB)
Input attenuator accuracy: ± 1dB/10dB
Maximum input level: +10dBm, 25VDC (0dB attenuation), +20dBm (40dB attenuator)
Tracking generator
Output frequency range: 0.15MHz~1050MHz
Output level ranges: -50~+1dBm (10dB step variable adjustment)
Output attenuator: 0~40dB (4x10dB)
Accuracy (attenuator): ± 1dB
Output impedance: 50 ω (BNC)
Frequency range: 0.15~1050MHz
Frequency response: 1.5dB
Frequency injection interference (RFI): ﹤ 20dB
General configuration
Power supply: 200VAC/110 VAC ± 10%,50Hz~60Hz
Track alignment: adjust the Panel (TR)
Power consumption: 20W ± 20%
Protection: security level 1 (IEC1010-1)
Size: 285 (w) x125 (h) x380 (d) mm
Weight: about 7 kg
