SYD-2801C penetration Tester

SYD-2801C penetration Tester

1+
6500 CNY (946.42USD)
3+
6480 CNY (943.51USD)
5+
6450 CNY (939.14USD)

add to cart

Product parameters:

  • Brand: meet macros
  • Model: SYD-2801C
  • Measuring range: 0~ 600
  • Measurement accuracy: ± 1 penetration
  • Apparent size: 0


This instrument is according to People's Republic of China standard GB/T 4509-1998/2010 oil asphalt needle into degrees determination method, GB/T269 grease and oil fat cone into degrees determination method and the People's Republic of China industry standard JTG E20-2011 Highway Engineering asphalt and the asphalt mixed material test procedures in the of T0604-2011 asphalt needle into degrees test in the of technology requirements and about provides design manufacturing of, main applies Yu asphalt needle into degrees of test and grease ( Oil or grease) cone penetration testing. The instrument can also be used to fine particles, powder, gel, freezing, as well as material, as well as cheese, sugar gum, butter, wheat and cream, cream, fermented foods, such as raw, in the food industry, traffic engineering and other industrial sectors are widely used.

Main technical characteristics

1, the penetration value of digital display, intuitive and eye-catching.

2, needles when there are 6 control device, control precision is high.

3, lifting the coarse and fine adjustment function, convenient adjustment and PIN accurate.

4, with fat players, constant temperature bath, water bath temperature control, use of a machine, instrument of high cost performance.

5, select the standard needle, sample dishes, thermometers and weights of different configurations to suit the national standard GB/t 4509-1998, GB/T 4509-2010 and measurement of JTG E20-2011 T0604-2011 roads (instrument with accessories configuration table attached sheet).

The greatest feature of the instrument is: advanced mechanical design, lifting convenient adjustment; Digital temperature controller, temperature control is accurate; The penetration of high-precision digital test meter, measurement results are reliable.

Second, the main technical parameters and indicators

1, measuring range: 0~ 600 penetration;
2, PIN when the managed appliances: You can select 5, 8, 10, 12, 30, 60 seconds, time error of less than ± 0.1 s;
3, resolution: 0.01 mm;
4, needle into the accuracy: ± 1 penetration;
5, heating power: 200W;
6, precision temperature control: 25 ± 0.1 ℃ (Note: the ambient temperature should be no higher than 20 degrees);
7, temperature control method: High-accuracy digital temperature controller;
8, constant temperature bath: Hard glass cylinder;
9, mixing: Magnetic stirring beads automatically stir;
10, standard needle: 50 mm, 2.5G ± 0.05g (base configuration, as described in the configuration table in the annex attached sheet);
11, standard Cone: 102.5 0.05g, compliance with the specifications of the national standard GB/T269;
12, lifting support: Coarse and fine tune double lifting mechanism, easy to tip at the specimen plane;
13, other: With a cold light and magnifying glass, easy to use and operate.

Third, options and accessories

1, the needle: the newly developed product.
2, Cone: 1/2 cone 1/4 cone.