Description:
Swept-frequency superheterodyne spectrum analyzers scan frequency range tuning, the spectrum of frequency components in turn sampled over time. Therefore, the scan tune the Spectrum Analyzer can display the cycle signal and random signals. AT5010A Spectrum Analyzer frequency 1GHz (0.15~ 1050MHz) with thick mixed fine adjust the center frequency and 100KHz/~ 100MHz/sweep width selection, composed of simple frequency-domain measurements. A 4-digit LED display optional center frequency or marker frequency readout.
Features:
• Frequency range: 0.15~ 1050MHz
• 4-digit digital display (center frequency, 0.1MHz resolution)
• -100~ +13dBm range, 20KHz, 400KHz If bandwidth and 4KHz video filters
• Output amplitude: +0~ -50dBm (50 ω)
Uses:
An Taixin Spectrum Analyzer information that normally appears not the processed signal, voltage, power, cycle, waveforms, sideband and frequency of wave distortion, dual-tone intermodulation distortion detection and clutter. Good remote control, intercom, measuring transmitter receiver, cordless phone survey for analysis. Also can be widely used in teaching and research. Spectrum Analyzer can really see An Taixin signals (such as RF pulses) images using Fourier series expansion, more easy to understand teaching, scientific research better.
Cable TV CATV and telecommunications testing:
An Taixin spectrum analyzers meet the impedance converters (50 ω conversion 75 ω), cable television (CATV) and communications, cable, wireless systems for inspection and analysis of signal frequency.
GSM, CDMA mobile phone repair:
An Taixin Spectrum Analyzer can detect mobile phone RF local oscillator signal if signal transmitter signal. AT5010A Spectrum Analyzer maintenance phone no network failure point, fast and accurate fault location repairs.
Frequency extension
• Instrument combined with frequency Extender (AT5000-F1) can measure the frequency extension to 2000MHz (qualitative measure), only to enter a channel extension, cannot be used to expand the trace source, 1050 MHz~ 2050 MHz measuring range.
• Instrument combined with frequency Extender (AT5000-F2) can measure the frequency extension to 3000MHz (qualitative measure), only to enter a channel extension, cannot be used to expand the trace source, 2050 MHz~ 3050 MHz measuring range.
Electromagnetic compatibility testing (EMC):
• Measuring all kinds of electronic devices with the launch of the features of harmful electromagnetic waves.
• Cooperate with EMI AT-166 EMI test for tested products.
• Combined with electric field Monopole probe AZ-530-E for testing radiated emissions testing.
• Combined with magnetic field probe AZ-530-M on the inner circuit of the product being tested sources of interference for testing.
• High-impedance probe AZ-530-H on the inner circuit of the product being tested for maintenance testing.
Listen signal function:
FM demodulation signal Spectrum Analyzer output, and analyse the content of unencrypted radio and broadcast signals to influence can be used to identify noise, timely analysis from the air station, were testing in order to determine the normal running and measuring some unknown third party radio activity.
Technical specifications:
Range: 0.15~ 1050MHz
Center frequency display accuracy: ± 2%x spectral width +5x10-3x frequency +100KHz
Marking accuracy: ± 0.1% band +100HKz
Frequency display resolution: 100KHz (4-digit LED)
Scan width: ~ 100MHz/100KHz/lattice 125 gears and 0Hz/grid (0 scan); Accuracy: ± 10%
Frequency stability: better than 150KHz/hours
Wide frequency band ( -3dB): 20KHz (± 50%); 400KHz+ (0, 40%); video filter (pass); 4KHz
Scan rate: 43Hz
Range
Range: -100~ +13dBm
Display range: 80dB (10dB/)
Reference level: -27dB at 500MHz
Average noise level: -90dBm (20KHz, dBm typical)
Distortion: 2 3 ﹤ -55dBc, 3-order intermodulation: -70dBc
Sensitivity: better than -90dBm
A logarithmic scale: ± 2dB (without the attenuator), 500MHz
Enter
Impedance: 50 ω
Connectors: n (f) connector
Attenuator: 0~ 40dB (step 4x10dB)
Input attenuator accuracy: ± 1dB/10dB
Maximum input level: +10dBm, 25VDC (0dB attenuation), +20dBm (40dB attenuator)
General configuration
Power supply: 200VAC/110 VAC ± 10%,50Hz~ 60Hz
Track alignment: adjust the Panel (TR)
Power consumption: 20W ± 20%
Protection: security level 1 (IEC1010-1)
Size: 285 (w) x125 (h) x380 (l) mm
Weight: about 7 kg
