Integrated chip design:

Using micropower CPU Set meter , Patch technology welding Then , Precise and reliable , Use a section 9VThe battery can work continuously 150hour.

A little button is automatically calibrated:

The instrument can be used to meet the standard conductivity of each range 1 Point automatic calibration ,When calibrated , The instrument automatically recognizes the calibration solution , If you use it error Or with the set value of the larger deviation of the conductivity of the calibration , The instrument will automatically alarm. .

Automatic range conversion:

Measure the conductivity or solubility of the total solids (TDS)Time , The instrument has an automatic range conversion function immersion After the solution ,Will be automatic scanning The current measured value and turn Change volume Process , The instrument will display the end point measurement at an exact resolution. .

Automatic power monitoring:

Inside Set Power monitoring control chip , When the battery is low , The battery icon will automatically turn off to prompt you to replace the power supply

The temperature coefficient can be set:

Solutions containing different ions tend to have different temperature coefficients , accurate set up Temperature system The number of pairs Accurate measurement is essential ,Can be 0to 3.9%Set in degrees per range. .

The electrode constant can be set:

When measuring high or low conductivity solutions , You need to select different constant conductance electrodes , With three electrode constants optional , You can set it according to the selected electrode , The instrument will automatically convert the end point measurements. .

Can be set TDS coefficient:

According to conductance analysis , Measurement of water solubility of the total solid should be accurately estimated Count , set up TDS system number, .

Automatic message prompts:

Has the operation information prompt function , When you Into a A setting or measurement , The information bar will help you understand what the instrument can do and what to do in its current state , It is equivalent to the instructions in the manual , You can easily complete a setup or measurement task. .

Data storage and output:

The instrument has 64Group data storage function , Press during measurement SAVE key , The instrument automatically saves the current measurement and marks the serial number for that data , Date and time for information. . by USB Data lines , Data stored in the instrument can be sent to the PC , You can save measured values ​​or print test reports in software.

Technical Parameters: