Germany Erichsen hardness testing instrument letter stick model 318

1+	4980 CNY (725.11USD)
3+	4950 CNY (720.74USD)
5+	4900 CNY (713.46USD)

add to cart

Product parameters:

Brand: meet macros
Model: model 318
Product type: Vickers hardness tester
Measuring range: 0
Test force: 0

Brief introduction

318 hardness test great needs of modern manufacturing processes and efficient testing methods, fast, direct, precise, any time, any place. This instrument is designed to measure the hardness of the coating. Film, plastic coating hardness through 318-hardness test to accurately measure and record the measurement surface may be flat or curved surfaces, regardless of size. Instrument is in stand-by status at all times. It can fit in your pocket, used in a variety of hardness testing. Uniform hardness and coating qualities conducive to the smooth flow of production. Deviation from the specified hardness can lead to returns, production delays and complaints. Developed by Robert Bosch GmbH, production apparatus, and regular quality control of instruments meet the protective coating, even during the production process. 318 type hardness testing rods for engineers, foremen, monitors and other relevant personnel to provide a test instrument can meet a variety of smooth production operation needs.

Hardness test great detail

Test procedure
Special simple portable hardness testing Rod used for 318. With a slider to set the estimated or known spring pressure. The instrument vertically in the test surface, straight line speed of 10 mm/sec flat 5~10 mm. Test head produces a scratch that is only visible to the naked eye. If spring pressure is too high, scratch is very clear, if the spring pressure is too low, there will be no scratches appeared. By locking the slider can control the amount of pressure, measured in newtons. The scale engraved on the pen consists of 3 pressure range:

0-3 N	Blue tag
0-10 N	Red tag
0-20 N	Yellow tag

Each corresponds to a pressure range of the spring scale corresponds with the colour code.
Maintenance and repair
A clean instrument can produce a test result. To clean it, loosen the nut and remove the tick. Clean with a soft cloth and split pin hole. In addition instruments do not require further maintenance.
Although 318 hardness test great consistency, but the test can't stand a lot of momentum. Provided with the instrument wooden box of a protection function. When not used, the slider should be set to zero in order to protect the accuracy of spring.
Technical data

Pressure spring:	Spring steel
Test head:	Tungsten carbide
Head diameter:	0.5 mm Opel
	0.75 mm Bosch
	1.0 mm in accordance with ISO 1518 and DEF
Length:	160 mm
Diameter:	16 mm
Weight, net weight:	About 250 g

318 type hardness testing rods Hardness test | bar |Germany Erichsen meter order information

Order no	Overview
0002.01.31	318 hardness testing instrument letter bar
The scope of supply -1 head diameter of 0.75 mm Bosch -Three springs -1 wooden box

318 type hardness testing rods Hardness test | bar |Germany Erichsen device accessories/parts

Order no	Overview
0428.01.321	Test head	In line with Opel
0428.02.32	Test head	In line with Bosch
0428.03.32	Test head	In line with ISO 1518
0429.01.32	Spring 0-3 n
0429.02.32	Spring 0-10 n
0429.03.32	Spring 0-20 n