Description:

Swept-frequency superheterodyne spectrum analyzers scan frequency range tuning, the spectrum of frequencies

With sampling in turn out of time. Therefore, the scan tune the Spectrum Analyzer can display periodic signals

And random signals. AT5005 Spectrum Analyzer frequency (0.15~ 500MHz) with thick blending fine tune

Center frequency, and ~ 50MHz/10KHz/lattice sweep width selection, composed of simple frequency domain measurement

... A 3-digit LED display optional center frequency or marker frequency readout.

Features:

• Frequency range: 0.15~ 500MHz

• 4-digit digital display (center frequency, 0.1MHz resolution)

• -100~ +13dBm range, 20KHz, 400KHz If bandwidth and 4KHz video filters

Uses:

An Taixin Spectrum Analyzer information that normally appears not the processed signal, voltage, power, weeks

Period, the waveform, sideband and frequency of wave distortion, dual-tone intermodulation distortion detection and clutter. Very good

Remote control, intercom, measuring transmitter receiver, cordless phone survey for analysis. Can also be widely used

In teaching, scientific research. Spectrum Analyzer can really see An Taixin signals (such as RF pulses

) Images using Fourier series expansion, more easy to understand teaching, scientific research better.

Cable TV CATV and telecommunications testing:

An Taixin spectrum analyzers meet the impedance converters (50 ω conversion 75 ω), cable television (CATV) and communications

Machine, such as cable, wireless systems for inspection and analysis of signal frequency.

Electromagnetic compatibility testing (EMC):

• Measuring all kinds of electronic devices with the launch of the features of harmful electromagnetic waves.

·Meet EMI AT-166 EMI test for tested products.

• Combined with electric field Monopole probe AZ-530-E for testing radiated emissions testing.

• Combined with magnetic field probe AZ-530-M on the inner circuit of the product being tested sources of interference for testing.

• High-impedance probe AZ-530-H on the inner circuit of the product being tested for maintenance testing.

Listen signal function:

FM demodulation signal Spectrum Analyzer output, and analyse the content of unencrypted radio stations that can be used to

Identifying noise influence of broadcast signals, timely analysis from the air station, and sentenced

Fault-detection equipment for normal operation and measurement of some unknown third party radio activity.

Technical specifications

Frequency

Range: 0.15~ 500MHz

Center frequency display accuracy: ± 2%x spectral width +5x10-3x frequency +100KHz

Marking accuracy: ± 0.1% band +100HKz

Frequency display resolution: 100KHz (3-digit LED)

Scan width: ~ 50MHz/10KHz/lattice 125 gears and 0Hz/grid (0 scan), accuracy: ± 10%

Frequency stability: better than 150KHz/hours

Wide frequency band ( -3dB): 20KHz (± 50%); 400KHz+ (0, 40%), the video filter

(Pass); 4KHz

Scan rate: 43Hz

Range

Range: -100~ +13dBm

Display range: 80dB (10dB/)

Reference level: -27dB at 500MHz

Average noise level: -90dBm (20KHz, dBm typical)

Distortion: 2 times 3: ﹤ -55dBc, 3-order intermodulation: -70dBc

Sensitivity: better than -90dBm

A logarithmic scale: ± 2dB (without the attenuator), 500MHz

Enter

Impedance: 50 ω

Connectors: n (f) connector

Attenuator: 0~ 40dB (step 4x10dB)

Input attenuator accuracy: ± 1dB/10dB

Maximum input level: +10dBm, 25VDC (0dB attenuation), +20dBm (40dB attenuator)

General configuration

Power supply: 200VAC/110 VAC ± 10%,50Hz~ 60Hz

Track alignment: adjust the Panel (TR)

Power consumption: 20W ± 20%

Protection: security level 1 (IEC1010-1)

Size: 285 (w) x125 (h) x380 (d) mm

Weight: about 7 kg