The electro-hydraulic type tension and compression test frame is specially equipped with HF series push-pull tester, manual operation, the use of hydraulic jack to achieve large load test force testing, simple and stable operation.

Specifications:

Note: 1. The test frame can be customized according to the specifications of the user requirements

2. The dynamometer in the diagram should be ordered separately

3. When installing, please install the sensor, machine and jack in the center. When testing, the direction of tension and compression load should be in the center of the machine
WARNING: 1. Wear protective masks and gloves in case of damage testing to prevent splashing during testing.

2. Do not use jigs that have been damaged or bent, and may fall off or break when using a damaged or bent fixture, and the test object may fall, so care should be taken not to injure the body.

3. Do not exceed the rated load range of the sensor, otherwise the sensor will be damaged. If the load is too large, it may break the sensor and cause the accident.