ASKER Hardness (durometer) rapid determination of plastics, rubbers, synthetic resins, such as the hardness. Japan ASKER durometer is simple in structure, easy to use, small light and intuitively and so on, can carry handheld measurement device in production of the same types of rack he determined.

ASKER Rubber hardness tester Main parameters:

1. value dial: 0-100HA

2. needle pressure range: 0-2.5mm

3. the pressure pin pressure: 0.055N-8.06N

4.Dropper top diameter: 0.79mm ± 0.03mm

Scope of application:

Japan business ASKER durometer ASKER-D,For hard rubber ,Hard plastic.

Japan-ASKER durometer ASKER-F, suitable for soft plastic foam, foam rubber.

Japan-ASKER durometer ASKER-A, suitable for rubber.

Japan-ASKER durometer ASKER-C, suitable for sponges, soft rubber, porcelain clay, hard foam rubber, wire spool.

Action steps:

1) Switch on the power, check for boot correctly, try and pressure head is installed correctly

2) Adjust the screw position, ensure that test enough with the head positioned workpiece

3) Place the sample on the test bench, adjusting dial pointer 'C'

4) Test of torsional selector to the ruler of the appropriate test

5) When contemplating the dial at the same time, clockwise rotation roller screw up until hardness dial pointer (pointer) three times, early test of small points to red flags

6) After three times if the hardness of the pointer away from c when zero, within the allowed deviation from c plus or minus 5 degrees, c zero-turn the scale on the dial to align the pointer to zero

7) Press the Start button, automatic test force and to keep the test force applied, note at this time do not touch the roller handle.

8) After the main force dismount, referred to can be read on the dial pointer value

9) Hardness values after you read, that is reversible-clockwise roller lowering of the lifting screw, removing test

Notes:

1)Diamond Head, high hardness, brittle, should pay attention to avoid impact during use.

2)Strength and force save time, adjustment and rotational test of choice twist is strictly prohibited. Dates to remember

3)Equipment weight come off easily, use process to avoid moving and shaking body.

4)Check on a regular basis, keep the measurement results