A: an overview

This Tester is used to test tensile and compressive deformation and the load of the spring characteristics of instruments. Apply compression or tension springs must work under the working length

Load testing. The tester uses advanced, integration of highly integrated single-chip microcomputer and LCD display, external metal jacket, which greatly improves the system's

Anti-jamming capabilities.

II: features

1, LCD displays, and someone better mutual interface

2, high precision and high resolution

3, selected from the three kinds of measuring units, conversion

4, users can set the acceleration, so that more accurate measurement and unit conversion

5, store up to 99 sets of test data, you can directly view data stored on the local computer and deleted.

6, in real time, peak, peak three modes automatically switch

7, with custom settings feature, free to set upper and lower limits (acousto-optic alarm), store the value retention value, automatic peak value storage time, automatic shutdown time without operation, set free

8, print test data that is stored, and the maximum value, minimum value, on average, to be qualified or not qualified to judge (only with printer)

9, adopting MODBUS-RTU standards of communication protocol using USB interface with better configuration and PLC connection

Third, key description

1, set key: user measure interface you can use this button to enter the Setup menu, and press this key to save the data in the data.

2, view the key: when measuring interface with this key you can view the stored measurement data

3, peak key: used to toggle real-time peak, peak three automatic measurement mode

4, save: to save the measurement data

5, the unit key: used to switch n, Kg, Ib three units

6, zero key: real-time measurement, press this key, to correct the zero point. Automatic peak and peak, press this key, you can clear the peak and return to zero; View

Interface, press the key, you can clear the current stored measurement values, press this key, you can clear all the stored measured values. In the user interface, press the key, do not save

Return to the previous interface.

7, print key: measurement interface, press this key, you can print the stored measurement value. (Except for non-printing machine)

8, up: in the user interface, press this button to modify the settings in the parameter settings, press this button, you can move, to select the digit to be modified;

Viewing interface, press the key, you can view the previous data.

9, down arrow key: set in the user interface, press down the button Modify settings, parameter setting, press this key, data modifications can be in the current position; View

Interface, press this key, you can view the next data.

10, ON/OFF key: can be used to boot and shutdown

IV specifications