AGN series of high-speed impact torque tester is to test and detect a variety of high-speed impact torque and design and manufacture of an intelligent multi-function measuring instruments. Mainly used for testing and

Calibration of various electric pneumatic screwdriver, torque screwdriver, torque wrench torque, a variety of products involved in the test of tightening force, parts to reverse the destructive test, etc. With the operation

Simple, high precision, full function, easy to carry and so on, widely used in a variety of electrical, light industry, machinery manufacturing, research institutions and other industries. The instrument has a print,

Without the printer.

Features

1 can test high speed wind batch or power tools;

2 high sampling high precision high resolution: sampling frequency 2000HZ, accuracy 1, the minimum reading of 0.0001N;

3 three kinds of display options: real-time, peak, automatic peak;

4 unit conversion: N. M, kgf. Cm, lbf. (Also has a small range of mN.m, gf.cm, mlbf.in);

5 peak hold function: can capture the peak in the test;

6 comparison function: the upper and lower limits of free deviation set, the alarm lights were to traffic lights and automatic alarm;

7 automatic peak function: peak hold time (1 ~ 99 seconds) free to set;

8 automatic shutdown function: off time (0 ~ 9 points) free set (0 seconds that does not automatically shut down);

9 gravity acceleration function: according to the different regions, can be freely set (9.000 ~ 9.999);

10 sampling point frequency function: 10 times / second, 20 times / second, 50 times / second, 100 times / second four free choice;

11 calculation function: connected to the computer, you can automatically calculate the maximum value of each test, the minimum, the average value;

12 built-in printer: can print 1000(AGN-2 to 20 and AGN-2 to 20P, AGN-50 to 500 and AGN-50 to 500P, AGN-1000 to 5000 and AGN-1000 to 5000P,

Specifications