ZBQ coated on all sides | Wet film preparation | Coating | All preparation | Single blade preparation

ZBQ coated on all sides | Wet film preparation | Coating | All preparation | Single blade preparation

430-580 CNY (62.61-84.45USD)

add to cart

Product parameters:

  • Customized processing: no
  • Brand: snow color
  • Model: ZBQ coated on four sides
  • Uses: paint
  • Specifications: single-edged 800UM, single blade 400UM 125UM single blade, single blade 150UM, single blade 300UM, single blade 50UM, single blade, 100UM, single blade, 3705UM, single blade 500UM, single blade 200UM, single blade 600UM, one 700UM, one 1000UM, one flute 25UM, one 250UM, one 75UM, 205-500-750-100,50-100-150-200,50-75-100-150,25-50-75-100,5-10-15-20,100-150-200-250,30-60-90-120,100-200-300-400


ZBQ provisions is mainly used for coating thickness of wet film preparation the wet film to determine the coverage of the sample, such as color, or prepared sample. Using
High wear-resistant material made of stainless steel and durable.
SZQ single blade of wet film preparation the wet film preparation and ZBQ-4 two of four edge wet film preparation.

★ SZQ-4 edge wet film preparation specifications: (film width: 80mm)

Introductions: Slot coating device is designed to use in coating paint on flat substrates, adhesives and similar products. Groove film selection of diversity and fixed upon the precision of the coating are combined in one instrument. Can be applied to water, acid and alkaline products.

Main technical parameter:
High stainless steel wear-resistant materials effective coating width: 80mm; Total length: 100mm
■ Ordering information:
NO/1: (5m, 10m, 15m, 20m)
NO/2: (25m, 50m, 75m, 100m)
NO/3: (50m, 100m, 150m, 200m)
NO4: (30m, 60m, 90m, 120m)
NO/5: (100m, 200m, 300m, 400m)
NO/6: (50m, 75m, 100m, 150m)
NO/7: (100m, 150m, 200m, 250m)
NO/8: (250m, 500m, 750m, 1000m)
Reserve under the model you want, thank you for your cooperation

Four-edge wet film preparation instructions for use

Material: stainless steel

Second, the hardness of HRC55 ± 2

Size/precision

5 ± 210 ± 215 ± 220 ± 2
Size/precision10 ± 215 ± 220 ± 225 ±
Size/precision25 ± 250 ± 275 ± 2100 ± 2
Size/precision50 ± 275 ± 3100 ± 3150 ± 3
Size/precision100 ± 3150 ± 3200 ± 3250 ± 3
Size/precision250 ± 3500 ± 5750 ± 51000 ± 10

Third, application: wet film thickness of coating in provisions to determine the coverage of the sample, or color

Model, and so on.

Four directions: place the model on the platform, be fixed, when preparation for the sliding date shall not be removed

Move. wet film thickness as needed select the preparation, on the model of the short edge, close to the parallel provisions of

Position, and then in front of the preparation on the island about 5 ml of the sample and hold it at both ends with your fingers,

At speeds of 150 mm/second, namely the wet film thickness of the coating as needed. After use wash in solvent wipe

Dry, oil on the surface.