Fluke 116C digital multimeters to measure current function, designed specifically for the HVAC professional. It has HVAC instruments required for a variety of digital multimeter in measuring the current functions, including for the HVAC equipment and flame sensor temperature and microamp measurements for rapid troubleshooting.
Another Fluke 114 electrical multimeter, Fluke 115C multimeter with non-contact voltage measurement function electrical technicians by Fluke 117C multimeter.

• Built-in thermometer for HVAC applications
• UA for testing flame sensor measurements
• LoZ features: low input impedance to prevent errors due to false voltage readings
• White LED backlighting in a weak position can also be a powerful light reading
• Multimeter to measure current resistance, continuity, frequency and capacitance measurement
• Minimum/maximum/average measurements, recording signal fluctuations
• Compact ergonomic design for one-handed operation
• You can use magnetic meter hanging lace matching (ToolPak ™) without hand-holding can measure
• Safety grade CAT III 600 v

Note: 1) in addition to automatic low impedance (Auto-V LoZ) measurements, ranges are provided for all communication within the range 1 to 100%. Automatic low impedance (Auto-V LoZ) defined as 0V. Since not provided below input voltage range 1%, so when the disconnect test leads from the circuit, or the two test leads together and when a short circuit occurs, the instrument or other true RMS meter displays non-zero readings are normal. For voltage measurement, when 4,000 bits, crest factor ≤ 3; When the full degree, 1.5 per cent under peak coefficient of linear. AC voltage is AC coupled. LoZ and automatic voltage AC mV DC coupled. 2) temperature error (accuracy) does not contain the error of thermocouple probes. 3) frequency is AC-coupled, AC voltage, frequency from 45 Hz to 50 kHz.