Integrated ultrasonic level gauge Product features and features:

1.Big 4Bit led display.

2.Automatic tracking of ambient temperature compensates for distance in real time.

2.Difference, value ranging options, you can measure the level, but also measure the distance.

3.Can adjust the display brightness, adapt to the visual, easy observation and operation.

4.Detection cycle is adjustable.

5.1-15Level transmitter power selection, can be modified according to different conditions.

6.Measurement start and end arbitrary settings, on-site calibration.

7.The current output adjusts its output range.

8.Adjustable fluctuation range, to prevent interference malfunction.

9.Signal interface 2KV Surge protection, 15KV Electrostatic protection, 600WLightning protection.

10.Intelligent echo analysis technology, shielding invalid interference, measurement stability, higher accuracy.

11.Non-contact measurement, higher service life.

12. Communication speed adjustable 1200BPS - 115200BPS.

Technical indicators

Range: 0-10m

Blind areas: 30-80cm (According to range adjustment)

Beam angle: 15°

Accuracy: ± 0.2% (under calibration conditions)

Resolution: 1 mm

display: 4Bit led , Units Mm

Signal output: 4-wire 4-20ma (default) and the other optional relay output, RS485 output

working frequency: 40khz

Operating temperature: -20--+60Lt; 0 & gt; C

Working humidity: ≤ 80% rh

Working voltage: DC12V-36V

Protection class: IP65

Dimensions:

Installation Precautions:

Correct error: the instrument to the vertical interface, can not tilt

Error: (The meter is too close to the feed inlet and should be kept in error: the liquid level is in the dead zone

50cm above the distance.)

Error: (liquid surface fluctuation range is too big, should install error: (distance irrigation side is too close, should distance 50cm above)

Waveguide Or static wells.)