PRO360 Product Introduction: Digital inclinometer (aluminum alloy with magnetic, aluminum alloy without magnetic, stainless steel with magnetic, stainless steel without magnetic four)

main feature :

● 360 ° × 0.1 ° complete measurement.

● When the Inclinometer is upside down, the angle readings of the LCD display are automatically turned upwards for easy reading.

● Precision mechanical stainless steel frame structure.

• No special tools or equipment can be used for recalibration.

● multi-purpose measuring tools, protractor, inclinometer and the level of three-in-one.

● a 3-volt battery 3000 hours of continuous use Main technical parameters:

Technical parameters: Range: 4 × 90 ° (0 ~ 360 °)

Working temperature: -5 ℃ ~ +50 ℃

Operating humidity: ≤ 85% RH

Display resolution: 0.1 °

Accuracy: ≤ 0.2 °

Power: CR2032 3V lithium battery

1. Impact-resistant aluminum alloy mechanical structure, durable.

2. V-base design can be used once in the curved surface, the cylinder surface.

3. The base has a # 6-32 threaded hole, can be installed to extend the base application in the special measurement

4. Use the standard 9V alkaline batteries, under normal circumstances can be used for 250 hours.

5 The 'B' signal appears on the display when the battery level is low.

6. ON / OFF for the power switch, the instrument has a 5-minute automatic power off.

7.HOLD to keep the health. Click here to build the upper right corner of the display HOLD location will appear square flashing signal, that data is retained.

Press the key once again, the blinking signal is removed and the original state is restored.

8. ALT ZERO to set the zero health. According to this health appears 'ALT'O' look at the lower right corner of the display ALT ZERO position a square flashing signal, which means the data is reset to zero

Press the key once again, the blinking signal is removed and the status is restored.

9.CALIBRATION for self-correction function