Product overview

﹡ Brinell hardness test, hammer test force applied, shear pin precisely controlled test force. Test accuracy, test results consistent.
﹡ Test force F=1580kg Pressure head diameter D=7.26mm , F/D2Value is equal to 30. Meet the Brinell hardness test and similarity principle is equivalent to the common 3000kg Force, 10mm Ball.
﹡ Without clamping parts, only the component side to complete the test, don't depend on the shape and size of the sample is high.
﹡ Consume only a cheap cut PIN for each test.
﹡ Reliability, repeatability and accuracy than Leeb hardness tester and old-style hammer Brinell hardness tester.

Technical parameters

Try Inspection Force : 1580kg
Pressure Head: 7.26mm Steel ball Indenter, measuring range 100~350HBW
4mm Carbide ball Indenter, measuring range 350~650HBW
As shown in Value Errors Poor: ≤ 5%HBW
Repetition error : ≤ 5%HBW
Measuring Try Fan Wai: 100~650HBW
Heavy Weight: 0.8kg
Should Use Fan Wai: Castings, forgings, steel, heat treated parts

Application note

﹡ Hammer timed hardness should be regularly compared with desktop Brinell hardness meter test to verify the accuracy of the test results. No Desktop Brinell hardness timing available CRack type static Brinell hardness meter instead.

Configuration and selection

Standard configuration

7.26mm Steel spherical Indenter
Shear pin
Sleeve
Support handles
Brinell hardness block (HB10/3000)
Shear pin (250Support /Box)
In addition to pin
20Light reading microscope
Instrument case

Optional accessories

7.26mm Steel spherical Indenter
4mm Cemented carbide spherical Indenter
Shear pin
Sleeve
Brinell hardness block (HB10/3000)
Shear pin (250Support /Box)
20Light reading microscope (for the 7.26mm Pressure head)
40Light reading microscope (for the 4mm Pressure head)
Rechargeable hand-held angle grinder

Instrument selection