The vibration signal of the bearing is sensitive, but not stable enough. The vibration signal is sensitive to the vibration signal, but the vibration signal is sensitive to the vibration signal. The vibration energy value is not sensitive enough, but will grow steadily with the fault.This requires that the diagnosis of such failures, it is necessary to pay attention to high-frequency impact value, but also concerned about the low frequency RMS. EMT226 can meet the above requirements, not only can measure Frequency vibration acceleration peak and average, and can measure the effective value of low-frequency vibration velocity; the same time, the instrument also provides high-frequency absolute determination of standards and low-frequency vibration intensity standard (ISO2372) to jointly determine the bearing and gear status.

Diagnostic frequency range: 10Hz ~ 1KHz (Lo) state

The center frequency is about 32 kHz (Hi)

Effective display range: vibration velocity rms (Lo RMS) 0.0 ~ 199.9 mm / s

The vibration acceleration average value (Hi AVE) is 0.00 to 19.99

Peak vibration acceleration (Hi PEAK) 0.0 to 199.9

Measurement accuracy: ± 5% ± 2 words (Lo RMS)

± 20% ± 2 words (Hi AVE)

Display: three and a half LCD digital display

Power: 9V laminated battery 1, can be used continuously for 25 hours

Maintained characteristics: automatically hold the measured value, delay automatic shutdown

Volume: 190 mm x 75 mm x 32 mm

Weight: 240g