product description

* Suction to the parts on the test, only contact parts side to complete the test.
* No need to move parts.
* There is no need to find a position on the part that can be clamped.
* Using 5mm ball, 750kg test force, and the use of 2.5mm ball Brinell hardness compared to a larger indentation, with better representation, read the indentation is also relatively easy.
* And other forms of hydraulic Brinell hardness compared to simple, easy to use.
* Any shape, any size material, part, or steel structure can be tested as long as a test surface is available for adsorption by the instrument.

Technical Parameters

Test force: 750kg
Head: 5mm carbide ball
Test range: 100 ~ 650HBW
Indication error: in line with GB, ISO, ASTM standards
Repeatability of indication: accord with GB, ISO, ASTM relevant standard
Test force error: ≤ ± 1%, in line with GB, ISO, ASTM and other related standards
Weight: 15.8 kg
Test surface: plane: Area ≥ 290mm × 90mm Surface: diameter ≥ 120mm

Application Notes

* For other methods can not or inconvenient to test large, large parts, such as castings, forgings, steel, steel, steel, die steel.
* For large shaft, beam, all kinds of large and large heat treatment parts.
* Used for all kinds of pipe, large equipment and large steel structure which have been welded or already assembled.
* For the magnetic steel parts, does not apply to non-magnetic austenitic stainless steel, high manganese wear-resistant cast iron and other materials.

Configuration and matching

Host
Afterburner handle
Pry bar
Brinell hardness blocks
Base iron
40 times with a light source reading microscope
5mm spare carbide ball