HL600 portable hardness tester/Leeb hardness tester/Vickers hardness tester/Brinell hardness tester/portable

1+	2570 CNY (374.2USD)
3+	2550 CNY (371.29USD)
5+	2500 CNY (364.01USD)

add to cart

Product parameters:

Brand: meet macros
Model: HL600
Product type: Leeb hardness tester
Measuring range: 170-960
Test force: 0

HL-600 digital display sclerometer

Product introduction:
Imported high speed thermal printer core support on-site instant printing, importing long-lasting paper data storage for a long time.
Low-power design concept based on stable IC
Portable Leeb hardness tester based on the hardness measurement, can be measured easily and quickly on a variety of materials, hardness measurement values are displayed at the same time, can be prepared in a variety of hardness (Brinell HB, Rockwell HRC, Vickers HV, Shaw HS) free conversion allows for preset tolerance limit, out of range alarm. Host the product design and integrated high speed thermal printer, imported high-speed core support on-site instant printing capabilities of the printer, imported long-lasting paper data storage for a long time. Low-power IC IC design concept based on stability, standard high capacity, long life, high speed rechargeable Ni-MH battery pack. Chinese display, menu-driven operation is simple and convenient, seven special impact device without calibration, automatic identification, USB interface transfer, mass storage, attached to the PC machine and human data processing software.
Second, the technical parameters:
Measuring range: (170-960), HLD, (17.9-69.5), HRC, (19-651), HB, (80-1042), HV, (30.6-102.6) HS
Measuring direction: support 360 degrees (straight down down, horizontal, diagonal up, straight up)
Material: steel and cast steel, alloy tool steel, stainless steel, grey cast iron, nodular cast iron, cast aluminum alloy, copper-zinc alloys (brass), copper-Tin alloys (bronzes), pure copper, forged steel
Hardness standard: Richter (HL), Brinell (HB), Los B/C (HRB/C), Rockwell (HRA) and Vickers (HV), shore (HS)
Display: dot-matrix LCD, 128x64 graphic dot matrix LCD
Data storage: Max 500 group (impact and number of 32~ 1)
Thermal printer, working quietly, you can print any number of copies of test results, meet the needs of field
Print width: (57.5 ± 0.5) mm; Printer paper roll diameter: 30mm
Operating voltage: 6V Ni-MH battery pack; Power supply: 9V/500mA; 2.5~ charge time 3.5 hours
Continuous operating time: approximately 150 hours (does not print, when the backlight turns off); standard communication interface: USB1.1
Applicable materials:
Steel and cast steel, alloy tool steel, stainless steel, grey cast iron, nodular cast iron, cast aluminum alloy, copper-zinc alloys (brass), copper-Tin alloys (bronzes), pure copper, forged steel
Four, working conditions:
Ambient temperature: operation temperature:-10~ + 50 ℃; Storage temperature:-30 ℃ ~ + 60 ℃; Relative humidity 90%;
Environment no strong vibration, does not have a strong magnetic field, no corrosion and serious dust.

Product features:
According to Leeb hardness measuring principle, the detection of multiple metallic materials; Software calibration.
A host can be equipped with 7 different impact devices, automatically identifies impact devices types, replacement without recalibration.
Support ' forged steel (Steel) ' material when using a D/DC impact device test ' forged ' sample can be directly read HB values without manual look-up table.
On the hardness value can be pre-set limit, out of range alarm, convenient batch testing needs.
128x64 the big screen graphic dot matrix liquid crystal display, information-rich and intuitive.
Chinese display, menu-driven operation, the operation is simple and convenient. EL backlight display, convenient for use in dimly lit environments.
You can store up to 500 groups (impact and number of 32~ 1) hardness measurement of data, each set of data including single measurement values, the average measurement date, impact direction, frequency, material, hardness and other information.
Thermal printer and instrument integration as one, quiet, fast print speeds, you can print test reports.
Built-in rechargeable Ni-MH rechargeable batteries and control circuits; Not less than 150 hours of continuous operation; Has auto sleep, energy-saving features such as automatic shutdown.
The remaining battery indicator icon on the LCD, real-time display battery life; Indicates the charging process, the operator can keep informed of doc.
USB interface, you can easily and quickly Exchange data with the PC machine. Can be equipped with the software, transferring measurement results, measured value storage management, statistical analysis of measured values, print a measurement report, rich features such as bulk set the instruments parameters to meet the higher demands on quality assurance and management.