Product overview

﹡ Superficial Rockwell hardness tester Compact and light, minimum weight of only 0.7kg.
﹡ Easy to operate, can be used as micrometers.
﹡ Flexible application, use at your desk can be inserted in the cradle, can also be brought to the shop floor.
﹡ In full accordance with the principle of Rockwell hardness test design, test results, and reliable.
﹡ Test accuracy, accuracy with the same desktop, in line with the standard GB/T230.2.

Main technical parameters

Test force: 3kg

Total test force: 15kg, 30kg, 45kg

Pressure: 120 ° diamond Cone

Ф 1.588mm carbide ball

Afterburner: screw Afterburner

Test item: the superficial Rockwell hardness of HRN, HRT, 15 rulers

Resolution: 0.5HR

Accuracy: up to standard GB/T230, IS06508, ASTM E18

Application: all metals, including steel, stainless steel, bronze, brass, copper

Aluminum, aluminum and other

Application note

﹡ Rockwell superficial hardness indentation is very small, no effect on most of the parts used, can be considered as non-destructive testing.
﹡ To test the thin small parts, such as tinplate, steel, copper, aluminium, metal parts, small parts.
﹡ Can be used to test the hardness of the carburized layer thinner.
﹡ Instead of the higher price and inconvenience of Vickers hardness tester.
﹡ PHR-1S is equipped with the appropriate anvil, testing 2mm small shaft, 2.5mm balls, test small parts, fittings and supporting very small stampings.
﹡ PHR-1S completed with diamond anvil tests tinplate and super thin metal strips.

Standard configuration

Host: 1

Bearing block: one

Diamond Head: 1 (120 ° cone)

Ball head: 1 (ø 1.588mm)

Flat anvil: one

V-anvil: one

Anvil: one

Standard hardness block: 3 blocks

Extension Arbor for: one

Case: one

Optional accessories

Carbide ball head: ø 1.588mm , Ø3.175mm , Ø6.35mm , Ø12.7mm

Diamond-anvil: for thickness 0.05mm-0.6mm sheet materials, such as tinplate, cold rolled steel, thin steel strip.

Slender anvil: ø 1.5mmx11mm, ø 2.0mmx11mm, ø 3.0mmx11mm, for small stamping parts and supporting small workpieces

Ball anvil: for ø 2-18mm steel ball

Small shaft anvil: for ø 2-22mm small shaft, thread

Instrument selection