First, an overview:

Mattel MH320Portable Leeb hardness tester based on the hardness measurement, can be measured easily and quickly on a variety of materials, hardness measurement values are displayed at the same time, can be prepared in a variety of hardness (Brinell HB , Rockwell HRC , Vickers HV , Shaw HS ) Free conversion allows for preset tolerance limit, out of range alarm. Host the product design and integrated high speed thermal printer, imported high-speed core support on-site instant printing capabilities of the printer, imported long-lasting paper data storage for a long time. Low-power design concept based on stable IC ICS, standard high capacity, long life, high speed rechargeable Ni-MH battery pack. Chinese display, menu-driven operation is simple and convenient, seven special impact device without calibration, automatic identification, USB Interface transfer, mass storage, and PC Personalized data processing software.

Second, the technical parameters:

• Measuring range: (170-960) HLD,(17-68.5)HRC,(19-651)HB,
• Measuring direction: supports vertically downward, diagonal downward, horizontal, diagonal up, straight up
• Material: steel and cast steel, alloy tool steel, stainless steel, grey cast iron, nodular cast iron, cast aluminum alloy, copper-zinc alloys (brass), copper-Tin alloys (bronzes), pure copper, forged steel
• Hardness standard: Richter (HL)Blagojevich (HB), Rockwell B/C(HRB/C), Rockwell A(HRA), Vickers (HV), Shaw (HS)
• Display: dot matrix LCD , 128×64Graphic dot matrix LCD
• Data storage: Max 500Groups (number of shocks32~ 1)
• Thermal printer, working quietly, you can print any number of copies of test results, meet the needs of field
• Print width: (57.5±0.5) mm ; Printer paper roll diameter: 30mm
• Working voltage: 6VNi-MH battery pack ; Power supply: 9V/500mA ; Charging time 2.5~ 3.5Hour
• Working time: about 150Hours (does not print, when the backlight turns off) ;Interface standard: USB1.1

Third, the applicable materials:

Steel and cast steel, alloy tool steel, stainless steel, grey cast iron, nodular cast iron, cast aluminum alloy, copper-zinc alloys (brass), copper-Tin alloys (bronzes), pure copper, forged steel

Four, working conditions:

Ambient temperature: operation temperature:- 10~ + 50℃; Storage temperature: -30℃~ + 60℃; Relative humidity90% ;

Environment no strong vibration, does not have a strong magnetic field, no corrosion and serious dust.

Five features:

• According to Leeb hardness measurement principle can be carried out on a variety of materials testing ;Software calibration.
• A host can be equipped with 7Different impact devices, automatically identifies impact devices types ,Replacement without recalibration.
• Support ' forged steel (Steel ) ' Material, when used D/DC Impact device test ' forged ' sample can be directly read HB Without manual look-up table.
• On the hardness value can be pre-set limit, out of range alarm, convenient batch testing needs.
• Use of large-screen 128×64Graphic dot matrix liquid crystal display, information-rich and intuitive.
• Chinese display, menu-driven operation, the operation is simple and convenient. Have EL A backlit display, convenient for use in dimly lit environments.
• Maximum storage 500Groups (number of shocks 32~ 1) Hardness measurement of data, each set of data including single measurement values, average, measurement date, impact direction, frequency, material, hardness and other information.
• Thermal printer and instrument integration as one, quiet, fast print speeds, you can print test reports.
• Built-in rechargeable Ni-MH rechargeable batteries and control circuits; Continuous work is not less than 150Hour; Has auto sleep, energy-saving features such as automatic shutdown.
• The remaining battery indicator icon on the LCD, real-time display battery life; Indicates the charging process, the operator can keep informed of doc.
• Have USB Interface, you can easily, quickly and PC For data exchange. Can be equipped with the software, transferring measurement results, measured value storage management, statistical analysis of measured values, print a measurement report, rich features such as bulk set the instruments parameters to meet the higher demands on quality assurance and management.
• Instrument small and portable integrated thermal printer can print, overall dimensions: 212mm×80mm×32mm

Six instrument configuration:

Special impact device

Seven, power on display and a brief description:

Battery: displays the remaining capacity.

• Impact: the impact direction.

• Average value: after the set number of shocks, displays the average appeared.

• Standard hardness: hardness of the current measured value.

• Measurements: current single measurement values (average tip-free), the current average (mean).

• Display: indicates more than conversion or measurement range, lower conversion or measurement range.

• Materials: materials for the current setting.

• Number of shocks: impact number displayed when the measurement has been completed, with the shortcut key display settings when setting the impact and number of number of number of shocks, when browsing a single measurement values display the corresponding number of single measurement.

Eight USB data processing software:

• Deposit: the measured data is stored

• Out: data from the host to bring up

• Print: print the data output, the A4 interface

• Overload: overload displayed when the set tolerance limits

• Clear: clear data

• Connections: setting and host connections

• Disconnect: disconnect set from the host

• Download: download the data to a local, realization of mass storage

• Settings: parameters setting

• Help: instant help feature

Seven, the MH310 MH320 differences are as follows:

1, On the show: the MH310 is a segment LCD, economy function is relatively simple. MH320 menu-driven operation, powerful, easy to use 2, storage: MH310 can store up to 100 Group (impact and number of 32~ 1), MH320 storage 500 group.

3, On the standard: MH310 data processing software for optional configuration, MH320 standard standard data processing software.

Eight notes:

• This can only be provided by the use of the company's special battery and power adapter (charger), as it may cause equipment damage, battery leakage, fire or explosion.
• When printing or when printing is completed please do not open the paper cover, contact printer core by hand or any part of the body, so as to avoid excessive temperatures result in Burns.
• Do not put batteries into fire, do not short circuit the battery, broken up or heat, as it may lead to battery leakage, fire or explosion.
• If stored for a long time the instrument (not used), please make sure the battery switch is in the 'OFF' position, as it may lead to battery failure or leakage and damage to the printer.

IX, warranty description:

Under normal operating conditions of the user in accordance with the instructions, product quality problem in two years, the manufacturer warranty. Wearing, except consumables.

Ten tables measuring range:

11, special impact device technical data sheets and apply: