Shanghai Hongju | ETCR010KD opening and closing type DC leakage current sensor

1+	450 CNY (65.53USD)
2+	420 CNY (61.16USD)

Product parameters:

Technical specifications

Features	DC leakage current, DC small current Detection
Detection method	Open - close CT
power supply	9VDC ± 1V DC
Power consumption	20 mA max
Opening and closing dimensions	10 mm
Range	0.0 mA ~ 100mA DC
Resolution	0.1 mA DC
Accuracy class	± 3.0% FS (23 ℃ ± 2 ℃, 70% RH or less, wire in the jaw center)
Turns ratio	1:800
Signal output	25mV / 1mA , 0 ~ 100mA corresponding to the output of 0 ~ 2.5V
responding speed	2Times / sec
Output Interface	Brown line - positive output signal; black line - common ground terminal (negative input of the power supply and negative output of the signal, can be connected with the external power supply); Layer shield shorted)
Lead length	4 core shielded cable 2m
Geomagnetic interference	About 3 mA
Wire position	The wire to be tested is in the center of the opening
Line voltage	DC 600V the following line test
Dimensions	53 mm 42 mm 28 mm
Quality	About 125 g
Working temperature and humidity	-10 ℃ ~ 45 ℃; 80% rh or less
Storage temperature and humidity	-10 ℃ ~ 60 ℃; 70% rh or less
Dielectric strength	AC 2kV / rms (between core and housing)
Suitable for safety regulations	IEC1010-1, IEC1010-2-032, pollution, etc. 2, CAT Ⅲ (600V)
Accessories	A sensor, the user manual, warranty card

Type of open and close current sensor