Shanghai macro | ETCR030 high-precision clamping leakage current sensor | Clamp sensor

Product parameters:

Technical specifications

Function	AC leakage current, higher harmonic current, phase, power, power, power factor testing
Measurement mode	Clamp CT
Jaw size	25mm×30mm
Range	0.00mA~ 60A AC
Resolution	1uA AC
Accuracy grade	± 1.0%FS (50Hz/60Hz; 23 ℃ ± 2 ℃, 70%RH, and conductor at the Centre jaw position)
Turns ratio	1:800
Phase error	≤2°(50Hz/60Hz; 23℃±2℃)
Refer to the load	RL: 0~ 600mA≤300Ω; 0~ 6A≤30Ω; 0~ 60A≤3Ω;
Output mode	Output current sensing
Cable and plug	Line out: 2-core shield wire, cord length 2m; Plug: 3.5mm audio plug (customer requirements can be assembled plug)
Electric field interference	Electric field 100A near 10MM at 5mA
Wire location	Central location test conductor is in the jaws
Frequency	45Hz~ 60Hz (when testing high current)
Frequency characteristics	10Hz~ 100KHz
Line voltage	AC 600V circuit testing
Overall dimensions	Length: 115mmx width 70mmx thickness 33mm
Quality	180g
Working temperature and humidity	-20 ℃-50 ℃; 80%RH the following
Storage temperature and humidity	-10 ℃ ~ 60 ℃; 70%RH the following
Dielectric strength	AC 3700V/rms (between the core and shell)
For safety	IEC1010-1, IEC1010-2-032, pollution etc 2, CAT III (600V)
Supplied accessories	Sensor 1, user manual, warranty card

Clamping current sensor category