ETCR4800 pumping unit meter | Oilfield electrical Tester | Oilfield electrical parameter Tester

1+	1890 CNY (275.19USD)
2+	1820 CNY (265USD)
3+	1760 CNY (256.26USD)

add to cart

Product parameters:

Brand: Shanghai macro
Model: ETCR4800
Customized processing: no

Product features

1. Measuring the electrical parameters of oil: AC current, voltage, frequency, phase voltage and current, breaking resistance value Pumping up and down stroke of the maximum current, Lack of rushing, stroke up and down time, and number of strokes per minute, thereby distinguishing pumping units status , For Of pumping electric parameters of power balance on site monitor , Provides a secure, accurate, convenient oil meter.

2. Charging port, configure the charger.

3. Test line using electric power cable, Rod connectors and alligator clips have insulation protection.

4. Insulated slip cover.

5. RS232Interface, you can store 1000 measurements, by system software to upload the data to your computer, carry out data query, read, analyze and save report, print and so on.

6. Administrator settings, passwords entered, including the clock setting, well set, and password settings.

Technical specifications

Function	Electrical power for simultaneous measurement of oil parameters: AC current, voltage, frequency, phase voltage and current, breaking resistance value Pumping up and down stroke of the maximum current, Lack of rushing, stroke up and down time, and number of strokes per minute
Power supply	DC7.2V (1.2V 6, 5th rechargeable Ni-MH batteries 1200mAH)
Range	Voltage: AC 0V~ 700V
	Current: AC 0.0mA~ 300A
	Phase: 0 ° ~ 360 °
	Resistance: 0.00Kohm~ 20.0Kohm
	Frequency: 10.0Hz~ 70.0Hz
Resolution	Voltage: AC 1V
	Current: AC 0.1mA
	Phase: 1 °
	Resistance: 10ohm
	Frequency: 0.1Hz
Precision	Voltage: ± (1.5%RDG+3dgt)
	Current: ± (1.5%RDG+3dgt)
	Phase: ± 3 °
	Resistance: ± (2.0%RDG+3dgt)
	Frequency: ± (2.0%RDG+3dgt)
Measured phase frequency amplitude	Voltage: 30V~ 700V
Measured phase frequency amplitude	Current: 30mA~ 300A
Appearance quality	1kg (with attachments)
Meter size	Length thickness: 196mmx92mmx54mm
Jaw size	Round shape current clamp: 35mmx40mm
Detection Rate	About 2 seconds/second
Display mode	LCD Show 240dotsx160dots
Number number	100Number
Number sets	15Code that can be edited by instrument or PC software
Data storage	1000Group
Clock function	Have
Password settings	There, the 6-digit password
Backlight function	, Suitable for use in dark places and in the evening, do not operate the instrument will automatically turn off after 3 minutes the backlight
Automatic shutdown	Boot operation within 15 minutes upon the instrument will auto power off
Battery voltage	Instrument time display battery voltage when battery voltage is less than 6.5V, and low battery voltage symbol appears, please recharge the
Communications interface	USB Interface, data kept by computer, to facilitate the analysis of management data through software editing
Communication line	USB Communications cable, 1.8 m
Test length	1.5m
Current clamp cord length	2m
Working temperature and humidity	-20℃~ 40 ℃; 80%Rh the following
Storage temperature and humidity	-10℃~ 60 ℃; 70%Rh the following
Input impedance	Test voltage input impedance: 1M
Pressure resistance	Meters between shell and tolerance 1000V/50Hz sine wave AC voltage 1-minute
Insulation	Between meters and sheathed the shell 100M ω
Structure	Double insulation with Insulation vibration-proof sheath
For safety	IEC61010-1 CAT III 600V, IEC61010-031, IEC61326, pollution level 2
Power consumption	Backlight turn on maximum power consumption 50mA
Power consumption	The backlight turn off instrument power consumption 30mA
Supplied accessories	Host: 1; Current clamp: 1; Test line: 4; USB Cable: 1; Software CD: one; Enclosures: 1 PC ; Charger: 1; Rechargeable battery: 6 (1.5V, 5th)