ETCR010K retractable high-accuracy leakage current sensor

Product parameters:

Technical specifications

Function	AC leakage current, higher harmonic current, phase, power, power, power factor testing
Detection methods	Retractable CT
Closing dimensions	10MM (can be worn by 10MM wires)
Range	0.00mA~ 60A AC
Resolution	1uA AC
Accuracy grade	± 1.0%FS (23 ℃ ± 2 ℃, 70%RH, and conductor at the Centre jaw position)
Turns ratio	800:1 (can be customized according to needs)
Phase error	≤2°(50Hz/60Hz; 23℃±2℃)
Refer to the load	RL: 0~ 600mA≤300Ω; 0~ 6A≤30Ω; 0~ 60A≤3Ω;
Shield	Shield layer, suitable for complex interference environment
Output mode	Current sensing output, you can add-ins take voltage RL.
Output cord length	2-core shield wire 2m
Electric field interference	The shielding foreign 100A near 10MM at 5mA
Wire location	Central location test conductor is in the jaws
Frequency	45Hz~ 60Hz (when testing high current)
Frequency characteristics	10Hz~ 100KHz
Line voltage	AC 600V circuit testing
Overall dimensions	53mm×42mm×28mm
Quality	About 125g
Working temperature and humidity	-20 ℃-50 ℃; 80%RH the following
Storage temperature and humidity	-10 ℃ ~ 60 ℃; 70%RH the following
Dielectric strength	AC 2kV/rms (between the core and shell)
For safety	IEC1010-1, IEC1010-2-032, pollution etc 2, CAT III (600V)
Supplied accessories	Sensor 1, user manual, warranty card

Open type current sensor category