Shanghai macro ETCR068C clamping current sensor | Clamp sensor

1+	380 CNY (55.33USD)
3+	350 CNY (50.96USD)

Product parameters:

Technical specifications

Function	AC current, phase, power, power, power factor testing
Detection methods	Clamp CT
Jaw size	φ68mm
Range	0.0A~ 2000A AC
Resolution	0.1A
Accuracy grade	± 2.0%FS (50Hz/60Hz; 23 ℃ ± 2 ℃, 70%RH, and conductor at the Centre jaw position)
Turns ratio	Standard 2400:1 (can be customized according to needs)
Phase error	≤3°(50Hz/60Hz; 23℃±2℃)
Refer to the load	RL: 0~ 200mA≤2kΩ; 0~ 20A≤20Ω; 0~ 2000A≤0.2Ω
Shield	Clamp head without shielding
Output mode	Output current sensing
Cable and plug	Line out: 2-core shield wire, cord length 2m; Plug: 4mm dual banana plugs (customer requirements can be assembled plug)
Electric field interference	No shielding foreign 100A near 10MM 0.3A
Wire location	Central location test conductor is in the jaws
Current frequency	45Hz~ 60Hz (current frequency to be measured)
Frequency characteristics	40Hz~ 75Hz
Line voltage	AC 600V circuit testing
Overall dimensions	Length: 185mmx width 115mmx thickness 43mm
Quality	530g
Working temperature and humidity	-20 ℃-50 ℃; 80%RH the following
Storage temperature and humidity	-10 ℃ ~ 60 ℃; 70%RH the following
Dielectric strength	AC 3700V/rms (between the core and shell)
For safety	IEC1010-1, IEC1010-2-032, pollution etc 2, CAT III (600V)
Supplied accessories	Sensor 1, user manual, warranty card

Clamping current sensor category