Product Type: 100 square centimeters

Buy a sample knife to send the latest products

Quality assurance And imports the same blade material

Instructions:
Place the sample on the rubber mat, place the disc sampler on the fabric, pull out the locking device on the sampler, rotate it about 90 degrees, hold the outer casing in one hand and apply a certain Pressure, and then clockwise rotation corrugated hand wheel (corner greater than 90 degrees), you can cut the round specimen.
Sampler lock device after use, rotation to the original position, so that the blade can not be exposed, so as not to hurt hands and other items.
Structure and Adjustment:
Cutter blade is a double-sided blade a total of four, four equal parts for the round outside the cloth, the blade can be replaced, the specific operations are: loosen the Phillips screws (each piece has four screws), remove the blade plate and sampling blade, On the new blade, pressure on the blade plate, pay attention to the blade for the clockwise tangential, and four blades in the same plane, and then tighten the Phillips screw can be.
Ruled at the bottom of the instrument for fixed sample, easy to cut, to prevent slip of the sample.
Precautions:
The sharp edge of the blade, the use of the hands may not be on the bottom, so as not to damage.
The instrument should be cut in the rubber pad, the instrument wipe clean when not in the instrument box, so as not to damage.
Can reprovision professional high-precision electronic balance, accurate weighing grams, for all types of textile, fabric, dyeing, sampling and other factories