Brand: Ji Ming model: JM-B hydrostatic balance

Range: 2KG accuracy: 0.01

Power supply: AC/DC dimensions: 26.5*19.5

Disc size: 17.5*15.5

Specializing in the production of a variety of LED,LCD Electronic balance ,Product specifications from 1mg To 10kg . This product uses the high stability of strain transducers and top A/D Conversion chips ,Solves the creep from both at home and abroad with strain sensors, linear problems with counting, proofreading, fault display and other functions, the scales weighing accuracy, fast response and stability, easy operation ,Easy to learn and use, and are widely used in industry, agriculture, business, schools, research units of rapid measurement and counting. Ji Ming balance design, appearance, quality, stability, and adhere to the most preferential prices, the most excellent performance, the most perfect service ,Win the trust of our customers.

Common problems in buyers:

1You 0.1gJi Ming precision balance with windshield and weights, please?

Reply: 0.1gPrecision balance is not worthy, 0.01gAnd 0.001Accuracy of the match!

2And Ji Ming scale counts feature?

Answer: Yes

3How specifications there are two prices?

Answer: the digital display, is a liquid crystal display, LCD displays are AC-DC dual-use, so prices are more expensive.

Ji Ming balance simple maintenance methods:

1. Inaccurate weighing,

Processing methods :Calibration ,There are two types of calibration: 1Single point calibration, single point calibration with just one weight (Recommended calibration method ) ; 2Multiple-point calibration, Special tips : Multi point calibration needed more weight ,In case of insufficient weights cannot do this ,You cannot recover (Not recommended for use) .

Single point calibration: in cases, without any object on the scales, press the CAL Calibration key does not let go, and about the 3Seconds after '-CAL -' Let go immediately when, later on, shining standard weight values are displayed, will shine weights placed weight on the scales show '----' wait state, later on, standard weight value displayed, take the weight, showed '----' wait state, later on, display 0.0Or 0.01Or 0.001, End of calibration. Calibrated weighing is not accurate, calibrated according to the above process is repeated several times.

Multi point calibration: (Before calibration, please note ,In the case of insufficient weight ,Definitely not this )In the case, without any object on the scales, press the CAL Calibration key does not let go, and about the 3Seconds after '-CAL -' Let go immediately when, later on, shining standard weight values are displayed, and then press 'COU Or PCS Keys ', CA 2Seconds after a standard weight values, standard weight value will be displayed second place weight on the scales, displays '----' standby display standard weight value, take the weight, showed '----' wait state, shown later 0.0Or 0.01Or 0.001, End of calibration.

2.Appear low line Reason: balance weight on the negative.

Treatment methods: using weights to calibrate

3.Upper line Reason: overweight alarm

Treatment: using weights to calibrate

4.Appears Err-1 Reason: caused by continuous switching machine

Treatment methods: shut down for half a minute and then power on the

5.Appears Err-2 Reason: weighing is not stable

Treatment methods: wait a minute

Daily notice:
1Balance is a precision instrument, reference level adjustments before using the horizontal position
2Do not exceed the maximum weighing range, if overloaded, it will destroy the product
3, In use at room temperature and not in an environment of extreme cold or heat.
4Please place the product in a clean environment, dust, dirt, damp, vibration, flow and placed near the appliance can affect the accuracy of the product.
5To avoid violent shaking, floor or vibration products, ensure product accuracy!