KTRMUGER KT-506 (inductive) wood Water Moisture meter, can through a simple touch, rapid to measure the specific gravity is between 300-1000kg/m3 of various kinds of wood moisture content, not the material damage is detected.

This paragraph Advanced electromagnetic sensing technology of penetration depth of 50mm wood, resulting in a three dimensional field measurements of the magnetic field. Therefore, timber test instruments is a high degree of accuracy.

Instrument power on automatically 40 seconds after shutdown, can also shutdown, effective conservation of energy, protection equipment for longer periods of use.

Instrument with low voltage display, when LOBAT is displayed on the upper left corner of the display to remind the user to replace the power supply in a timely manner.

Instruments equipped with shatter-resistant shock-proof protection cover to protect the instrument against damage

Technical indicators:

1. brand: Italy ketemoge KTRMUGER KT-506

2. measuring range: 0-90%

3. display: LCD liquid crystal display

4. density adjustment: 300-1000kg/M3 (1-6)

5. scan depth: 0-50mm

6. accuracy: ± 0.5%

7: Dimensions 120×60×26mm

8: weight: 150g

Stalls

Wood air dry density (g/cm3)

1

ρ≤0.45

2

0.45< ρ≤0.55

3

0.55≤ρ≤0.65

4

0.65≤ρ≤0.75

5

0.75≤ρ≤0.85

6 0.85≤ρ

Second, use the method

Adjust the density switch

1: paulownia, Bai Tong, cryptomeria, Dawn Redwood, spruce, FIR, Fujian Cypress, pine, Abies delavayi, Picea jezoensis, Podocarpus, Phellodendron amurense, Maple Dr, mountain pine, Aspen, poplar, white oil, Sea Pines, Simpang pulai, big-leaf paint, Mr winter, Berube. (0--0.45)

2: Manchurian walnut, poplar, Maple poplar, Basswood, Pinus massoniana, Pinus, Tilia, Pinus sylvestris, Changbai mountain larch, yew, hemlock. (0.45--0.55)

3 document: willow, Phellodendron amurense, castanopsis tree, Sassafras tree, red chun, big leaves Yu, hemlock, alder, camphor, bundle spent thick shell GUI, new wood aurata, Ginkgo, oil cedar, Masson, Yunnan pine, yellow praying for, purple lime, crack leaves Yu, Maple incense, frame nan, spent Palmetto wood, wood load, platycladus orientalis, Pinus sylvestris, yellow shirts, AILANTHUS altissima, alder, mountain Acacia, cedar, Bai Chimu, mountain osmanthus, mountain three, paint wood, Cork, maple wood, Maple incense, building wood, mountain durian, mountain longan, horse Zhang , Bell, spring, nine layer cake (0.55--0.65)

4: oak, chestnut, birch, Shuo hua, xinganling larch, Catalpa wood, ash, g wood, mahogany, ash, Meranti, wood, Qi Mu, teak, Hystrix, bischofia, Phoebe, Bai Kemu, pulling, sorbic, fibreboard, key Board (0.65--0.75)

5: black locust, Fagus, beech wood, beech, Maple birch, chinquapin, red bean, eucalyptus, tree, camphor, bamboo (0.75--0.85)

6: haloxylon, zhuyeqing, Quercus variabilis, following wood, ebony, oak, mesua, catechin, Indus, Dalbergia flowers, Huang Guanmu, Pistacia, stone oak, small yedalimu, chicken Jane, long of castanopsis fissa wood, litchi, fine long, include oil, pine, Rouge, jialanyi, sand, red sandalwood, canoe tree (0.85--)

• KT-506 moisture meter penetrating depth of 50mm, so the measurement of wood thickness is less than 50mm, loft measurements to the boards.

• After instrument power on the less than zero, use a small screwdriver to adjust the instrument ZERO at the top (tree-band on the left side) regulator, a positive value less than zero, adjust counterclockwise; Instead, adjust clockwise.

• If there is a wood appears in two different stalls, to each adjacent measured by two numbers together and then divide by 2, the figure is the humidity of the wood.

• Wood density in different parts of the same type may vary, KTRMUGER recommends that you refer to the drying method standards of measure and choose the right gear.

• Within six months from the date of shipment, in case of product quality issues (which are not man-made damage) free warranty, the replacement within one month. Moisture meter calibration cycle is generally one year.