- Marketplace
- Merchants
- Restaurants
- UAE house
- Cloud accounting (GCC VAT)
- Me
- Cart
- My order
- Address book
- Favorite
- Link
- About us
- Download App
- 中文
- Merchant panel
2015 New Low Frequency Built in MPPT Solar Controler 1-6kw Solar Power Inverter
bargain
add to cart| Model NO. | PV3000 Series |
| Phase | Single |
| Certification | CE, ISO9001 |
| Type | DC/AC Inverters |
| Circuit Topologies | Push-pull Type |
| Input Voltage | 155-265VAC |
| Capacity | 1000-6000W |
| Charge Current | 40AMP/60AMP |
| Charger | MPPT Type Controler |
| Trademark | MUST Or OEM brand |
| Specification | ISO9001, CE, SONCAP |
| HS Code | 8504403090 |
| Nature of Source Flow | Active Inverter |
| Output Power | >1000W |
| Brand | Must or OEM |
| Power Source | Solar Power, Electric Power |
| Nature of Wave String | Sine Wave Inverter |
| Output Wave | Pure Sine Wave |
| Transformer | Pure Copper Transformer |
| Country of Origin | China |
| Application | Home Application, Air Conditioner |
| Transport Package | Carton |
| Origin | China |
1. It is an electronic system that operates the photovoltaic(PV) modules in a manner that allows the modules to produce all the power they are capable of. The solar mate charge controller is a microprocessor-based system designed to implement the MPPT. It can increase charge current up to 30% or more compared to traditional charge controllers.
AC or Battery Priority 1. Our inverter is designed AC priority by default. This means, when AC input is present, the battery will be charged first.
2. When you choose battery priority(Battery type selector on 7-9), then inverter will invert from battery despite the AC input. Only when the battery voltage reaches low voltage alarm point will be inverter transfer to AC input, charge battery and switch back to battery when the battery is fully charged. This function is mainly for wind/'solar systems using utility power as back up.
AC or Battery Priority 1. Our inverter is designed AC priority by default. This means, when AC input is present, the battery will be charged first.
2. When you choose battery priority(Battery type selector on 7-9), then inverter will invert from battery despite the AC input. Only when the battery voltage reaches low voltage alarm point will be inverter transfer to AC input, charge battery and switch back to battery when the battery is fully charged. This function is mainly for wind/'solar systems using utility power as back up.
| Hybrid Inverter | ||
| MPPT solar controller function | ||
| Rated Voltage | 12/24V DC | |
| Rated Charge current | 40A | |
| Load current | 15A | |
| Input voltage range | 15-55V DC | |
| Max. PV open circuit array voltage | 55V DC | |
| Typical idle consumption | At idle< 10mA10mA | |
| Overload protection(DC load) | 2.0 * Inom﹥5s 1.5 * Inom﹥20s 1.25 * Inom temperature controlledtrolled | |
| Bulk charge | 14.6V(default) | 29.2V(default) |
| Floating charge | 13.4V(default) | 26.8V(default) |
| Equalization charge | 14.0V(default) | 28.0V(default ) |
| Over charge disconnection | 14.8V | 29.6V |
| Over charge recovery | 13.6V | 27.2V |
| Over discharge disconnection | 10.8V(default) | 21.6V(default ) |
| Over discharge reconnection | 12.3V | 24.6V |
| Temperature compensation | 13.2mV/C | 26.4mV/C |
| Lead acid battery settings | Adjustable | |
| NiCad battery settings | Adjustable | |
| Load control mode | 1.Low Voltage Reconnect(LVR):Adjustable 2.Low Voltage Disconnect(LVD):Automatic disconnection 3.Reconnection:Includes warning flash before disconnect and reconnection | |
| Low voltage reconnect | 12.0-14.0Vdc | 24.0-28.0Vdc |
| low voltage disconnet | 10.5-12.5Vdc | 21.0-25.0Vdc |
| Ambient temperature | 0-40 °C (full load) 40-60 °C (de-rating)e-rating)e-rating) | |
| Altitude | Operating5000m,Non-Operating 16000m | |
| Protection class | IP21 | |
| Battery temperature sensor | BTS-optional remote battery temperature sensor for increased charging precision | |
| Terminal size(fine/single wire) | #8 AWG | |
| Solar inverter battery priority | |||||||
| MODEL | 1000w | 1500w | 2000w | 3000w | |||
| Input Voltage Waveform | Sinusoidal (utility or generator) | ||||||
| Nominal Input Voltage | 230Vac | ||||||
| Low Line Disconnect | 155Vac±4%lusmn;4%lusmn;4% | ||||||
| High Line Disconnect | 265Vac±4%lusmn;4%lusmn;4% | ||||||
| Max AC Input Voltage | 270Vrms | ||||||
| Nominal Input Frequency | 50Hz/ 60Hz (Auto detection) | ||||||
| Over-Load Protection | Circuit breaker | ||||||
| Output Short Circuit Protection | Circuit breaker | ||||||
| Efficiency (Line Mode) | >95% | ||||||
| Transfer Switch Rating | 30A | ||||||
| Transfer Time(Ac to Dc) | 20ms (typical) | ||||||
| Output Voltage Waveform | Sine wave | ||||||
| Rated Output Power (W) | 1000W | 1500W | 1500W | 2000W | 2000W | 3000W | 3000W |
| Power Factor | 1 | ||||||
| Nominal Output Voltage (V) | 230Vac | ||||||
| Output Voltage Regulation | ±10% rms;10% rms;10% rms | ||||||
| Nominal Efficiency | >80% | ||||||
| Nominal DC Input Voltage | 12V | 12V | 24V | 12V | 24V | 12V | 24V |
| Nominal Charge Current | 35A | 45A | 35A | 65A | 35A | 75A | 45A |
| Charge Current Regulation | ± 5Ausmn; 5Ausmn; 5A | ||||||
| Battery initial voltage | 0 -15.7 Vdc /31.4Vdc(can operate with 0V battery) | ||||||
| Communication: | RJ11 (Used for factory testing. No customer interface available) | ||||||
| Safety Certification | CE(EN60950) | ||||||
| EMI Classification | EN50091-2, CLASS A | ||||||
| Operating Temperature Range | 0°C to 40°C 40°Ceg;C 40°C | ||||||
| Storage temperature | -15ºC ~ 60ºC~ 60ºCrdm;C~ 60ºC | ||||||
| Operation humidity | 5% to 95% | ||||||
| Audible Noise | 60dB max | ||||||
| Cooling | Forced air, variable speed fan | ||||||
