10A/20A Charge Current Micro Power Inverter for Home Use

10A/20A Charge Current Micro Power Inverter for Home Use

50 USD

add to cart
Model NO. EP1000 500VA-2000VA
Output Power 501 - 1000W
Type DC/AC Inverters
Input Range 90-280VAC
Output Wave Modified Sine Wave
Frequency High Frequency
Display LCD Display
Name 10A/20A Charge Current Micro Power Inverter for Ho
Power Source Electric Power
Trademark MUST
Origin China
Certification CE, ISO9001
Nature of Wave String Sine Wave Inverter
with AVR Max Current: (10A/20A)
DC Input 12V/24V
Gw 2.8kg
Charge Function Three Steps Intelligent Charging Control
PCB Board Double Layers
Phase Single
Brand Must/OEM
Specification CE
HS Code 8504403090
10A/20A Charge Current Micro power inverter for home use
1. Features
The EP1000 series converts DC power into AC power.With a continuous output and compact design,the units sideal for running TVs,Stereos,Laptop and computers and other home appliancies .EP1000 serie will automatically transfer to inverter and provide power when AC supply is interrupted unexpectedly.
Super efficient, DC to AC conversion, minimizing charging losses
nput voltage range selection option
Fully automatic start operation
High frequency technology
Compact size and light weight
Provides critical overload protection
Eco-friendly & non-polluting (green device)vice)vice)
Advanced technology optimizes battery life

Model
EP1000 P500VA P1000VA P2000VA
Capacity VA/W 500VA / 300W 1000VA/600W 2000VA /1200W
Input Phase Single
Voltage 110 / 120VAC or 220 / 230 / 240VAC
Voltage Range 90 - 145VAC or 170-280VAC ( Narrow Range )
50-145VAC / 90-280VAC (Wide Range)
Output Phase Single
Voltage 120VAC or 230VAC
Voltage Regulation(Batt. Mode) +10% ~ 18%
Frequency 50Hz or 60Hz
Frequency Regulation (Batt. Mode) +/- 0.1 Hz
Output Waveform (Batt. Mode) Square Modified Sine wave
Power Factor P.F. 0.6
Battery Charger Current 10Amp + / - 1Amp 10 Amp + / - 1Amp
Floating Voltage 13.7V + / - 0.2V 27.4V + / - 0.4V
Overcharge Protection 14.5V +/- 0.3V charger stops and fault 29V +/- 0.6V charger stops and fault
Transfer Time Typical 8ms
Efficiency AC to AC >95%
DC to AC >80%
Indicator AC Mode Green LED lighting
Battery Mode Yellow LED lighting
Battery Charging Mode Green LED flashing every 2 seconds
Overload Red LED flashing every 0.5 second
Fault Red LED lighting
Audible Alarm Low Battery at Battery Mode Sounding every 2 seconds
Overload Sounding every 0.5 second
Fault Continuing sounding
Protection Full Protection Deep Discharge, Overcharge, and Overload protection
Physical Dimension (D*W*H) mm 224 X 255 X 80
Net Weight (kg) 1.7 for 500VA / 300W
Environment Operating Environment 0~40 Degrees Centigrade, 0~90% relative humidity (non-condensing)
Noise Level Less than 45dB

Pls kindly contact Vena Tang