I. Brief Introductions
PV Controller&Inverter Integrated Machine is a new kind of PV electricity generating equipment which combines PV controller and inverter.It consists of charge controller,inverter,mains supply bypass.mains supply charge compensation,output transfer and protection circuit. It outputs pure Sine wave voltage, and has following advantages, such as: only need small space,less connecting lines, good safety and reliability,etc.,etc.,etc.
II.Function Characteristics - High function of DSP control made by TI.
- Closed loop PID control,good quality of dynamic response of system and electric energy output.
- It can realize multiple solar energy array input control,omit the front end of combiner box , save the cost for consumer.
- Each charge detection with'return difference' control function, avoid switch being into oscillatory conditions.conditions.
- LCD display function, with the capacity of real time monitoring and display storage battery voltage,load current, ambient temperature ,AC output voltage,AC output current.
- Multiple protection and event record function.
- With power output statistics function.
- With mains supply compensation function, can realize uninterrupted switch.
- Low power display status, further decreased the self-wastage.
- Remote monitor and control(RS232 optional).
- Small volume,meet installation requirements of indoor and outdoor.
- Easy and fast maintenance.
III.Technical Parameter | Model | GSA24-300W | GSA24-500W | GSA24-800W | GSA48-1K | GSA48-2K | GSA48-3K | GSA48-4K |
|
| Rated capacity | 300W | 500W | 800W | 1KW | 2KW | 3KW | 4KW |
|
| DC input |
|
|
| Rated voltage (VDC) | 24.0 | 48.0 |
|
| Voltage Allowable range (VDC) | 20.0~35.0 | 40.0~70.0 |
|
| Low voltage protection value (VDC) | 21.6 | 43.2 |
|
| Low voltage recovery value (VDC) | 24.6 | 49.2 |
|
| Over voltage protection value (VDC) | 34.0 | 68.0 |
|
| Over voltage recovery value (VDC) | 32.0 | 64.0 |
|
| PV input |
|
|
| PV current(A) | 15 | 20 | 30 | 20 | 40 | 60 | 80 |
|
| PV path | 1 | 2 | 3 | 3 |
|
| Over charge protective value(VDC) | 28.8 | 57.6 |
|
| Over charge recovery value(VDC) | 23.4 | 56.8 |
|
| Mains supply bypass | |
|
| Voltage (VAC) | Mains supply switch function optional | 220±15%usmn;15%usmn;15% |
|
| Frequency (HZ) | 50 |
|
| Switch time (ms) | ≤3ms;3ms;3ms |
|
| DC output |
|
|
| Voltage (VAC) | 220±1%lusmn;1%lusmn;1% |
|
| Frequency (HZ) | 50±0.04smn;0.04smn;0.04 |
|
| Wave | Pure sine wave |
|
| Rated current (A) | 1.4 | 2.3 | 3.7 | 4.6 | 9.1 | 13.7 | 18.2 |
|
| THD | Linear<2%;non-linear<4%r<4% |
|
| Crest factor (CF) | 3:1 |
|
| Overload capacity | Over load 120% 60s;over 150% ls |
|
| Protection function | Protection for input anti-counter connection ,input low voltage protection, input over voltage protection, output over load protection, output shot circuit protection(need to restart the machine ,no automatically restore)over temperature protection . |
|
| Display mode | LCD/LED (optional) |
|
| Environment | |
|
| Protection degree | IP20 |
|
| Noise(dB @1m) | ≤50e;50e;50 |
|
| Ambient temperature (ºC)rdm;C)rdm;C) | -10 to 50 |
|
| Allows the relative humidity | <95% (non-condensing)ing) |
|
| Applied altitude(m) | ≤5000m000m000m |
|
| Cubic and weight | |
|
| Dimension (w*d*h) | 290 x 170 x 250 | 560 x 221 x 491 |
|
| Weight for reference(Kg) | | | | | | | | |
|
IV.Details Show V.Company Profile JIANGSU EKSI ElECTRICAL MANUFACTURING CO.,LTD locates in Yangzhou Economical and Technological Development Zone of Jiangsu. This is a large technological joint-stock enterprise in China, developing and manufacturing UPS(Uninterrupted Power Supply ), special UPS for electric power industry, EPS, grid-connected solar network, stand-alone inverter, percision air-conditioned, photovoltaic controller telecom power supply, AC&DC stabilized voltage supply, maintenance-free lead-acid batteries, transformers and reactors etc. etc. etc.
Certifications