H-3000 Mobile Medical Infant Warmer Incubator

1600 USD

Model NO.	H-3000
Theory	Infant Incubator
Group	Infant
Airtemp Control Range	20°c~37°cc~37°cg;cc~37°c
Mattress Tray Size	630×360 Mms;360 Mm;360 Mm
Skin Temp Sensor Accuracy	≤0.3°c0.3°cg;c0.3°c
Noise Level Within Hood Environment	≤55db;55db55db
Packing Size	100×58×80 Cm(2 Cartons) 120kgsartons) 120kgsrtons) 120kgs
Transport Package	Wooden Carton
Origin	China
Function	Infant Warmer Incubator
Certification	CE, ISO13485
Temperature Control Mode	Air and Skin Servo Control
Operate Port	6 (2 Iris Ports)
Skintemp Control Range	30°c~37°cc~37°cg;cc~37°c
Humidity Display Range	5%~99%
RS-232connector	Yes
Trademark	Healicom
Specification	High quality
HS Code	90189090

H-3000 Infant Incubator

STANDARD COMPOSITION:
Servo Control Mode: air temperature, skin temperature;
Instant Parameter Displaying: set temp, air temp ,skin temp, internal humidity ,heat power rate;
Audible & Visual Alarms: power failure, sensor failure, higher & lower temp, air& skin temp override, fan failure, system failure;stem failure;stem failure;
﹥37°C Preset Mode: power failure reset memory, alarm silence, keypad lock, self-test function;unction;tion;
RS-232 Output Connector (Use for network system )
SPECIFICATION
POWER
Model H-3000-1E: 110 / 120 V ac, 50Hz / 60Hz
Model H-3000-2E: 220 / 240 V ac, 50Hz / 60Hz
Power Input ≤400VA00VA00VA
ALARM
Power Failure
Fan Failure
Sensor Alarm
Air Sensor Failure
Sensor Out of Position
Skin Sensor Disconnected
Skin Sensor Failure
Deviation Alarm
High Air Temperature: Activated if displayed Air Temperature is 15°C above set pointpointpoint
Low Air Temperature: Activated if displayed Air Temperature is 25°C below set pointpointpoint
High Skin Temperature Activated if displayed Skin Temperature is 10°C above set pointpointpoint
Low Skin Temperature: Activated if displayed Skin Temperature is 10°C below set pointpointpoint
Over Temperature Alarm
Over Air Temperature: Activated when displayed Air Temperature was approach 38°C for set temperature ≤37°C, or approach 40°C for set temperature ﹥37°C in Air Modegt;37°C in Air Modeegt;37°C in Air Mode
Over Skin Temperature: Activated when displayed Skin Temperature was approach 38°C for set temperatureatureature :≤37°C, or approach 39°C for set temperature ﹥37°C in Skin Mode°C in Skin Modee°C in Skin Mode
System Alarm
System Failure: Activated if Temperature Control System malfunctions
TEMPERATURE CONTROL RANGE AND CORRELATIVE SPECIFICATIONS
Air Temperature: 20°Cdeg;Cdeg;C~37°C, for set temperature ≤37°C, 37°C°C, 37°C37°C°C, 37°C~39°C, for set temperature ﹥37°C>37°Ceg;C>37°C
Skin Temperature: 20°Cdeg;Cdeg;C~37°C, for set temperature ≤37°C, 37°C°C, 37°C37°C°C, 37°C~38°C, for set temperature ﹥37°C>37°Ceg;C>37°C
Temperature Rise Time :≤30min0min0min
Temperature Variability: ±05°Cusmn;05°Cg;Cusmn;05°C
Temperature Uniformity :≤1°C;1°Ceg;C;1°C
Skin Sensor Precision :≤03°C03°Ceg;C03°C
HUMIDITY
Humidity Display Range : 5%RH~99%RH
ENVIRONMENT REQUIREMENT
Environment Temperature
Operation Temperature Range: +20°Cdeg;Cdeg;C ~+30°C°Cg;C°C
Store Temperature Range: -40°Cdeg;Cdeg;C ~+55°C°Cg;C°C
Environment Humidity
Operation Humidity Range: 30%~75%
Store Humidity Range: 10%~100%
Atmospheric Pressure Range : 700hPa~1060hPa
OTHER SPECIFICATION
Noise Level Within Hood Environment: ≤55dB(Environment noise below 45dB)45dB)5dB)
Carbon Dioxide (CO2) Level within the Hood: Less than 05% when a mixture of CO2 in air is delivered at 750ml/min at a point 10cm above the center of the mattress
Air Velocity Over Mattress: less than 035m/s
Infant Bed Max Load: 10kg
Transfusion Shelf Max Load: 2kg
Cabinet Max Load: 6kg
FUNCTION OF ''SILENCE KEYSILENCE KEY
Make the alarm to be silence for 10 minutes by press this key, following:
Deviation Alarm
Sensor Alarm
Fan Alarm
FACTORY DEFAULT SETTINGS
Temperature Control Mode Air Temperature Mode
Air Set Temperature: 32°Cdeg;Cdeg;C
Skin Set Temperature: 34°Cdeg;Cdeg;C
Temperature Units:°Cdeg;Cdeg;C
NOTE: Open Access Panel or Access Door or the use of supplies or other equipment within the Incubator, which can alter the air flow pattern, may effect temperature uniformity, temperature variability, the correlation of the Incubator temperature reading to center mattress temperature and skin temperature.