Hospital Clinical Infant Incubator with CE (H-800)

900-901 USD

Model NO.	H-800
Certification	CE
Group	Infant
Medical Devices Reg./Record No.	Gsyjxz20123540587
Temperature Rise Time	≤30min30min0min
Temperature Uniformity	≤1°ce;1°cg;ce;1°c
Trademark	Healicom
Origin	China
Type	Infant Incubator
LCD Display	Without LCD Display
Medical Device Regulatory Type	Type 2
Temperature Control Mode	Air Control
Temperature Variability	±0.5°csmn;0.5°cg;csmn;0.5°c
Air Temperature	20°c~37°cc~37°cg;cc~37°c
Specification	ISO
HS Code	90189090

Standard Composition:
1. Servo Control Mode: air temp;
2. Instant Parameter Displaying: set temp, air temp, heat power rate;
3. Audible & Visual Alarms: power failure, sensor failure, higher/lower temp, air temperature override, fan failure;lure;lure;
4. Power failure reset memory and self-test function;
5. Hood with dual slope: 4 hand-ports
Specification:

Power	Model H-800-1E		110 / 120 V ac, 50Hz / 60Hz
	Model H-800-2E		220 / 240 V ac, 50Hz / 60Hz
	Power Input		≤400VA00VA00VA
	Refer to IEC60601-1, this equipment belongs to ClassI, Type BF Its operation is continuous
Alarm	Power Alarm	Power Failure: Activates if primary power to the Incubator fails or the power wire is accidentally disconnected from the wall receptacle
	Fan Alarm	Fan Failure: Activates if Fan motor malfunctions
	Sensor Alarm	Air Sensor Failure: Air Sensor malfunction, refer unit to service
	Deviation Alarm	High Air Temperature: Activated if displayed Air Temperature is 15°C above set pointpointpoint
		Low Air Temperature: Activated if displayed Air Temperature is 25°C below set pointpointpoint
	Over Temperature Alarm	Over Air Temperature: Activated when displayed Air Temperature was approach 38°C in Air Mode Mode Mode
	System Alarm	System Failure: Activated if Temperature Control System malfunctions
Temperature Control Range and Correlative Specifications	Air Temperature			20°C~37°C~37°Ceg;C~37°C
	Temperature Rise Time			≤30min0min0min
	Temperature Variability			±0.5°Cmn;0.5°Ceg;Cmn;0.5°C
	Temperature Uniformity			≤1°C;1°Ceg;C;1°C
Environment Requirement	Environment Temperature			Operation Temperature Range	+20°C~+30°C+30°Ceg;C+30°C
				Store Temperature Range	-40°C~+55°C+55°Ceg;C+55°C
	Environment Humidity			Operation Humidity Range	30%~75%
				Store Humidity Range	10%~100%
	Atmospheric Pressure Range			700hPa~1060hPa
Other Specifications	Noise Level Within Hood Environment			≤55dB(Environment noise below 45dB)5dB)5dB)
	Carbon Dioxide (CO2) Level within the Hood			Less than 0.5% when a mixture of CO2 in air is delivered at 750ml/min at a point 10cm above the center of the mattress
	Air Velocity Over Mattress			less than 0.3m/s
	Infant Bed Max Load			10kg
	Transfusion Shelf Max Load			2kg
Factory Default Settings	Temperature Control Mode Air Temperature Mode
	Air Set Temperature: 32°Cdeg;Cdeg;C
	Temperature Units:°Cdeg;Cdeg;C